On the graphene nanoplatelets reinforcement of hand lay-up glass fabric/epoxy laminated composites

被引：38
|
作者：
Seretis, G. V. [1 ]
Kouzilos, G. [1 ]
Manolakos, D. E. [1 ]
Provatidis, C. G. [1 ]
机构：
[1] Natl Tech Univ Athens, Sch Mech Engn, 9 Heroon Polytech Str, Athens 15780, Greece
来源：
COMPOSITES PART B-ENGINEERING | 2017年 / 118卷
关键词：
Laminates; Polymer-matrix composites (PMCs); Mechanical properties; Electron microscopy; THERMAL INTERFACE MATERIALS; MECHANICAL-PROPERTIES; CARBON NANOTUBES; TIMOSHENKO NANOBEAMS; POLYMER COMPOSITES; EPOXY COMPOSITES; NANOCOMPOSITES; MODEL; FORMULATION;
D O I：
10.1016/j.compositesb.2017.03.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Bending and tensile performance of hand lay-up produced glass fabric/epoxy laminated composites were investigated after matrix reinforcement with pre-dried graphene nanoplatelets (GNPs) up to 30% wt content. Two different types of E-glass fabric, i.e. twill 2 x 2 and uni-directional, were used for the tested composite samples. The response of the produced nano-composites is being explained by the settling mode of the GNPs onto the surface of the fiberglass filaments, as it was observed by a scanning electron microscope. Due to the different settling modes while increasing GNPs content, different fracture modes of the filaments were detected. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：26 / 32
页数：7
相关论文
共 50 条
  • [1] On the post-curing of graphene nanoplatelets reinforced hand lay-up glass fabric/epoxy nanocomposites
    Seretis, G. V.
    Nitodas, S. F.
    Mimigianni, P. D.
    Kouzilos, G. N.
    Manolakos, D. E.
    Provatidis, C. G.
    [J]. COMPOSITES PART B-ENGINEERING, 2018, 140 : 133 - 138
  • [2] Interlaminar reinforcement of glass fiber/epoxy composites with graphene nanoplatelets
    Kamar, Nicholas T.
    Hossain, Mohammad Mynul
    Khomenko, Anton
    Haq, Mahmood
    Drzal, Lawrence T.
    Loos, Alfred
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 70 : 82 - 92
  • [3] Effect of sonication on the mechanical response of graphene nanoplatelets/glass fabric/epoxy laminated nanocomposites
    Seretis, G. V.
    Theodorakopoulos, I. D.
    Manolakos, D. E.
    Provatidis, C. G.
    [J]. COMPOSITES PART B-ENGINEERING, 2018, 147 : 33 - 41
  • [4] Hybrid laminated composites molded by spray lay-up process
    Xiao, Bing
    Yang, Yuqiu
    Wu, Xiaofeng
    Liao, Mengyuan
    Nishida, Ryuiti
    Hamada, Hiroyuki
    [J]. FIBERS AND POLYMERS, 2015, 16 (08) : 1759 - 1765
  • [5] Lay-up independent fracture criterion for notched laminated composites
    Lee, Bokwon
    Sankar, Bhavani V.
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (14) : 2491 - 2499
  • [6] Hybrid laminated composites molded by spray lay-up process
    Bing Xiao
    Yuqiu Yang
    Xiaofeng Wu
    Mengyuan Liao
    Ryuiti Nishida
    Hiroyuki Hamada
    [J]. Fibers and Polymers, 2015, 16 : 1759 - 1765
  • [7] Effect of electrophoretically deposited graphene nanoplatelets on flexural properties of carbon fabric/epoxy laminated composites
    Junaidi, Ervina
    Jaafar, Mariatti
    Hamdan, Sinin
    Takagi, Hitoshi
    [J]. Journal of Physical Science, 2019, 30 : 91 - 102
  • [8] Effect of Electrophoretically Deposited Graphene Nanoplatelets on Flexural Properties of Carbon Fabric/Epoxy Laminated Composites
    Junaidi, Ervina
    Jaafar, Mariatti
    Hamdan, Sinin
    Takagi, Hitoshi
    [J]. JOURNAL OF PHYSICAL SCIENCE, 2019, 30 : 91 - 102
  • [9] A comparative study of the fatigue and post-fatigue behavior of carbon–glass/epoxy hybrid RTM and hand lay-up composites
    M. P. Cavatorta
    [J]. Journal of Materials Science, 2007, 42 : 8636 - 8644
  • [10] On feasible regions of lamination parameters for lay-up optimization of laminated composites
    Bloomfield, M. W.
    Diaconu, C. G.
    Weaver, P. M.
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2009, 465 (2104): : 1123 - 1143
12345