Investigation of effect of burner diameter on heat transfer characteristics of methane/air flame impinging on a flat surface

被引：2

作者：

Chander, Subhash ^{[1
]}

Ray, Anjan ^{[1
]}

机构：

[1] Indian Inst Technol Delhi, Dept Mech Engn, New Delhi 110016, India

来源：

HT2005: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE 2005, VOL 1 | 2005年

关键词：

impingement; Heat Transfer; Premixed Flame; burner diameter; Flame Shapes;

D O I：

10.1115/HT2005-72545

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

An experimental study has been conducted to investigate the effect of burner diameter on heat transfer characteristics of methane/air flames impinging normally to a flat surface. Three different tubes of internal diameter 8 mm, 9.7 mm and 12 mm were selected as flame holders. Effects of firing rates and equivalence ratios were studied on stagnation point and radial heat flux distribution. Three firing rates (0.25 kW, 0.40 kW and 0.50 kW) and three equivalence ratios (0.8, 1.0 and 1.2) were considered. Stagnation point heat flux was compared for different burner diameters under similar conditions. Radial heat flux distributions over the surface for different burner diameters under different firing rates and equivalence ratios were compared. It was found that the heat flux distribution was intimately related to flame shapes and sizes.

引用

页码：213 / 220

页数：8

共 50 条

[1] Influence of burner geometry on heat transfer characteristics of methane/air flame impinging on flat surface
Chander, S
Ray, A
[J]. EXPERIMENTAL HEAT TRANSFER, 2006, 19 (01) : 15 - 38
[2] Heat transfer characteristics of three interacting methane/air flame jets impinging on a flat surface
Chander, Subhash
Ray, Anjan
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (3-4) : 640 - 653
[3] Experimental and numerical study on heat transfer characteristics for methane/air flame impinging on a flat surface
Morad, M. R.
Momeni, A.
Fordoei, E. Ebrahimi
Ashjaee, M.
[J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2016, 110 : 229 - 240
[4] Experimental investigation on temperature field and heat transfer distribution of a slot burner methane/air flame impinging on a curved surface
Yousefi-Asli, Vahid
Houshfar, Ehsan
Beygi-Khosroshahi, Farnaz
Ashjaee, Mehdi
[J]. APPLIED THERMAL ENGINEERING, 2018, 129 : 761 - 771
[5] Heat transfer characteristics of premixed methane-air flame jet impinging obliquely onto a flat surface
Kuntikana, Pramod
Prabhu, S. V.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 101 : 133 - 146
[6] A COMBINED EXPERIMENTAL AND NUMERICAL STUDY OF HEAT TRANSFER CHARACTERISTICS FOR METHANE/AIR FLAME IMPINGING NORMALLY ON A FLAT SURFACE
Chander, Subhash
Ray, Anjan
[J]. HT2008: PROCEEDING OF THE ASME SUMMER HEAT TRANSFER CONFERENCE, VOL 3, 2009, : 235 - 242
[7] Investigation of Flame Structure for Laminar Methane/Air Flame Impinging on a Flat Surface
Chander, Subhash
Ray, Anjan
[J]. HT2009: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER, VOL 3, 2009, : 63 - 71
[8] Heat transfer characteristics of natural gas/air swirling flame impinging on a flat surface
Singh, Gurpreet
Chander, Subhash
Ray, Anjan
[J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2012, 41 : 165 - 176
[9] Heat transfer characteristics of laminar methane/air flame impinging normal to a cylindrical surface
Chander, Subhash
Ray, Anjan
[J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2007, 32 (02) : 707 - 721
[10] Heat transfer characteristics of premixed butane/air flame jet impinging on an inclined flat surface
L. L. Dong
C. W. Leung
C. S. Cheung
[J]. Heat and Mass Transfer, 2002, 39 : 19 - 26

← 1 2 3 4 5 →