Enhancing mechanical properties of an epoxy resin using "liquid nano-reinforcements"

被引：34

作者：

Sui, G. ^{[1
,3
]}

Zhong, W. H. ^{[1
]}

Liu, M. C. ^{[2
]}

Wu, P. H. ^{[2
]}

机构：

[1] Washington State Univ, Sch Mech & Mat Engn, Pullman, WA 99164 USA

[2] Spirit Aero Syst Inc, Wichita, KS 67210 USA

[3] Beijing Univ Chem Technol, Key Lab Beijing City Preparat & Proc Novel Polyme, Beijing 100029, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2009年 / 512卷 / 1-2期

关键词：

Nanofiller; Hybrid; Epoxy resin; Nanocomposite; Mechanical properties; POLYETHYLENE COMPOSITES; TENSILE PROPERTIES; CARBON; NANOCOMPOSITES;

D O I：

10.1016/j.msea.2009.01.023

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

"Liquid nano-reinforcements" and hybrids of nanofillers with different size were introduced in this study to simultaneously improve the reinforcement and toughening of an epoxy resin. The flexural strength and breaking strain of the epoxy composites with 0.3wt% reactive carbon nanofibers (CNFs) and 0.2 wt% carbon nanotubes (CNTs) increased by 45% and 64%, respectively, exceeding that of the epoxy nanocomposites singly reinforced by the same (0.5wt%) content of CNFs. The fracture surface of the hybrid nanocomposites indicated the high and broad resistance to fracture. Dynamic mechanical analysis showed there was an obvious increase in storage modulus and glass transition temperature for the hybrid nanocomposites compared to that of the neat epoxy resin. Published by Elsevier B.V.

引用

页码：139 / 142

页数：4

共 50 条

[21] Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)
Zhou, Wenying
Cai, Jiangtao
JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 124 (05) : 4346 - 4351
[22] Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)
Zhou, W. (wyzhou2004@163.com), 1600, John Wiley and Sons Inc (124):
[23] Enhancing Mechanical and Thermal Properties of Unsaturated Polyester Resin with Luffa Fiber Reinforcements: A Volumetric Analysis
Hameed, Sohaib Nafaa
Salih, Waleed Bdaiwi
REVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALS, 2023, 33 (06): : 357 - 362
[24] The effect of nano-additive reinforcements on thermoplastic microballoon epoxy syntactic foam mechanical properties
Dando, Kerrick R.
Salem, David R.
JOURNAL OF COMPOSITE MATERIALS, 2018, 52 (07) : 971 - 980
[25] Mechanical properties of glass fiber composites with an epoxy resin modified by a liquid crystalline epoxy
Punchaipetch, P
Brostow, W
D'Souza, NA
Jaklewwicz, M
Montemartini, P
Smith, JT
ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, : 2319 - 2323
[26] Mechanical properties of glass fiber composites with an epoxy resin modified by a liquid crystalline epoxy
Punchaipetch, P
D'Souza, NA
Brostow, W
Smith, JT
POLYMER COMPOSITES, 2002, 23 (04) : 564 - 573
[27] Enhancing the Mechanical and Thermal Properties of Epoxy Resin via Blending with Thermoplastic Polysulfone
Sun, Zeyu
Xu, Lei
Chen, Zhengguo
Wang, Yuhao
Tusiime, Rogers
Cheng, Chao
Zhou, Shuai
Liu, Yong
Yu, Muhuo
Zhang, Hui
POLYMERS, 2019, 11 (03)
[28] Enhancing the mechanical properties and heat resistance of epoxy resin via blending with polythioetherimide
Xu, Gang
Tan, Liyun
Liu, Keyuan
Yang, Rongqiang
Nie, Yong
Fang, Xingzhong
Chen, Guofei
POLYMER ENGINEERING AND SCIENCE, 2023, 63 (06): : 1772 - 1780
[29] Effect of nano-fiber cellulose addition on the mechanical properties of epoxy resin
Al-Turaif, Hamad A.
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2012, 243
[30] Nano and non-nano fillers in enhancing mechanical properties of epoxy resins: a brief review
Tee, Zhao Yi
Yeap, Swee Pin
Hassan, Cik Suhana
Kiew, Peck Loo
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 2022, 61 (07): : 709 - 725

← 1 2 3 4 5 →