Technical note: A 3D-printed phantom for routine accuracy check of Gamma Knife Icon HDMM system

被引：4
|
作者：
Wu, Chuan [1 ]
Radevic, Marlyn B. [2 ]
Glass, Jennifer S. [2 ]
Skubic, Stan E. [2 ]
机构：
[1] Sutter Med Fdn, Radiat Oncol, Roseville, CA 95661 USA
[2] Sutter Med Fdn, Radiat Oncol, Sacramento, CA USA
来源：
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS | 2018年 / 19卷 / 04期
关键词：
Gamma Knife; HDMM; Icon; phantom; QA;
D O I：
10.1002/acm2.12339
中图分类号：
R8 [特种医学]; R445 [影像诊断学];
学科分类号：
1002 ; 100207 ; 1009 ;
摘要：
Purpose: To report a novel 3D-printed device (SH phantom) that is designed for routine accuracy check of the Gamma Knife Icon High Definition Motion Management (HDMM) system. Methods: SH phantom was designed using tinkerCAD software and printed on a commercial 3D printer. We evaluated the SH phantom on our Gamma Knife Icon unit regarding its usability and accuracy for routine HDMM QA. Results: Single-axis and multiple-axis measurements validated the SH phantom design and implementation. An HDMM QA accuracy of 0.22 mm or better along single axis was found using SH phantom. Conclusions: The SH phantom proved to be a quick and simple tool to use to perform the HDMM system QA. The SH phantom was tested successfully and adopted by us as part of monthly QA for the Gamma Knife Icon.
引用
收藏
页码：299 / 301
页数：3
相关论文
共 50 条
  • [41] Accuracy and safety of 3D printed surgical guides combined with monitored guidewires for placement of cervicothoracic pedicle screws: Technical note
    Santos, R. B.
    Ribeiro, C. M.
    Grade, D.
    Pagaimo, F.
    Baptista, A. M.
    NEUROCHIRURGIE, 2023, 69 (02)
  • [42] LidarBoX: a 3D-printed, open-source altimeter system to improve photogrammetric accuracy for off-the-shelf drones
    Bierlich, K. C.
    Wengrove, Drummond
    Bird, Clara N.
    Davidson, Robert
    Chandler, Todd
    Torres, Leigh
    Cantor, Mauricio
    DRONE SYSTEMS AND APPLICATIONS, 2023, 12 : 1 - 10
  • [43] Biportal endoscopic extraforaminal lumbar interbody fusion using a 3D-printed porous titanium cage with large footprints: technical note and preliminary results
    Ki-Han You
    Jae-Yeun Hwang
    Seok-Ho Hong
    Min-Seok Kang
    Sang-Min Park
    Hyun-Jin Park
    Acta Neurochirurgica, 2023, 165 : 1435 - 1443
  • [44] Biportal endoscopic extraforaminal lumbar interbody fusion using a 3D-printed porous titanium cage with large footprints: technical note and preliminary results
    You, Ki-Han
    Hwang, Jae-Yeun
    Hong, Seok-Ho
    Kang, Min-Seok
    Park, Sang-Min
    Park, Hyun-Jin
    ACTA NEUROCHIRURGICA, 2023, 165 (06) : 1435 - 1443
  • [45] Technical note: A comparison of in-house 3D-printed and commercially available patient-specific skin collimators for use with electron beam therapy
    Herchko, Steven M.
    Rutenberg, Michael S.
    Beltran, Chris J.
    Yaddanapudi, Sridhar
    JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS, 2024, 25 (05):
  • [46] Deformable Image Registration Accuracy Between External Beam Radiotherapy and HDR Brachytherapy CT Images for Cervical Cancer Using a 3D-Printed Deformable Pelvis Phantom
    Miyasaka, Y.
    Kadoya, N.
    Kuroda, Y.
    Ito, K.
    Chiba, M.
    Nakajima, Y.
    Sato, K.
    Dobashi, S.
    Takeda, K.
    Jingu, K.
    MEDICAL PHYSICS, 2016, 43 (06) : 3736 - 3737
  • [47] ARISE-The Accuracy Evaluation of a Patient-Specific 3D-Printed Biopsy System Based on MRI Data: A Cadaveric Study
    Moebius, Robert
    Winkler, Dirk
    Kropla, Fabian
    Mueller, Marcel
    Scholz, Sebastian
    Gueresir, Erdem
    Grunert, Ronny
    BIOENGINEERING-BASEL, 2024, 11 (10):
  • [48] Development of Total Lymphoid Irradiation (TLI)-Dedicated Shielding and Image-Guided System and Dose Evaluation Using 3D-Printed Rat Phantom
    Choi, Dong Hyeok
    Ahn, So Hyun
    Park, Kwangwoo
    Choi, Sang Hyun
    Kim, Jin Sung
    FRONTIERS IN VETERINARY SCIENCE, 2022, 9
  • [49] Stepwise analysis of potential accuracy-influencing factors of iodine quantification on a fast kVp-switching second-generation dual-energy CT: from 3D-printed phantom to a simple solution in clinical routine use
    Boening, Georg
    Jahnke, Paul
    Feldhaus, Felix
    Fehrenbach, Uli
    Kahn, Johannes
    Hamm, Bernd
    Streitparth, Florian
    ACTA RADIOLOGICA, 2020, 61 (03) : 424 - 431
  • [50] Reconstruction with customized, 3D-printed prosthesis after resection of periacetabular Ewing's sarcoma in children using "triradiate cartilage-based" surgical strategy:a technical note
    Zhu, Dongze
    Fu, Jun
    Wang, Ling
    Guo, Zheng
    Wang, Zhen
    Fan, Hongbin
    JOURNAL OF ORTHOPAEDIC TRANSLATION, 2021, 28 : 108 - 117
12345