Finite element analysis on 1-3 piezocomposite rings for ultrasonic transducer applications

被引：4

作者：

Li, HL ^{[1
]}

Chong, CP

Chan, HLW

Liu, PCK

机构：

[1] Hong Kong Polytech Univ, Dept Appl Phys, Kowloon, Hong Kong, Peoples R China

[2] ASM Assembly Automat Ltd, Hong Kong, Hong Kong, Peoples R China

来源：

CERAMICS INTERNATIONAL | 2004年 / 30卷 / 07期

关键词：

lead zirconate titnate; 1-3; composite; finite element method; ultrasonic transducers;

D O I：

10.1016/j.ceramint.2003.12.064

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this study, a commercial finite element code (FEM), ANSYS, is used to study the behaviors of 1-3 lead zirconate titante (PZT)/epoxy composite rings. The composite rings are fabricated by a dice-and-fill technique with an epoxy width of 80 mum. By using different number of cuts per direction (cpd), the composites with PZT volume fraction (phi) from 0.88 to 0.93 could be obtained. It is found that the lateral characteristics (radial modes) of a PZT ring can be reduced significantly by using a 1-3 composite ring. Three-dimensional finite element models are built to understand and study the vibration characteristics of the composite rings. Good agreements are found between experimental results and FEM simulations. Results from this study can be used to optimize the number of cpd of the composite rings for practical transducer applications. (C) 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：1827 / 1830

页数：4

共 50 条

[31] Mode coupling in lead zirconate titanate/epoxy 1-3 piezocomposite rings
Or, SW
Chan, HLW
JOURNAL OF APPLIED PHYSICS, 2001, 90 (08) : 4122 - 4129
[32] High-frequency wide beam underwater transducer based on 1-3 piezocomposite
Zhong, Chao
Xu, Junan
Hao, Shaohua
Zhang, Yanjun
Wang, Likun
Qin, Lei
FERROELECTRICS LETTERS SECTION, 2021, 48 (4-6) : 93 - 103
[33] Ultrasonic two-dimensional array transducer of the single-unit type with a conductive backing of the 1-3 piezocomposite structure
Woo, Jeongdong
Roh, Yongrae
JAPANESE JOURNAL OF APPLIED PHYSICS, 2014, 53 (07)
[34] Lead-free BSZT/Epoxy 1-3 Composites For Ultrasonic Transducer Applications
Lee, S. T. F.
Lam, K. H.
Zhang, X. M.
Chan, H. L. W.
NEMS/MEMS TECHNOLOGY AND DEVICES, 2011, 254 : 90 - +
[35] A 15-MHz 1-3 Piezocomposite Concave Array Transducer for Ophthalmic Imaging
Cha, Jung Hyui
Kang, Byungwoo
Jang, Jihun
Chang, Jin Ho
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2015, 62 (11) : 1994 - 2004
[36] Thermo-mechanical stress effect on 1-3 piezocomposite power transducer performance
Richard, C
Lee, HS
Guyomar, D
ULTRASONICS, 2004, 42 (1-9) : 417 - 424
[37] Surface preparation of 1-3 piezocomposite material for microfabrication of high frequency transducer arrays
Bernassau, A. L.
McKay, S.
Hutson, D.
Demore, C. E. M.
Garcia-Gancedo, L.
Batton, T. W.
McAneny, J. J.
Cochran, C.
2007 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1-6, 2007, : 96 - +
[38] Research on a 1-3 piezocomposite projector
Zhang K.
Lan Y.
Li Q.
Gu Z.-Q.
Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2010, 31 (11): : 1485 - 1489+1508
[39] 1-3 piezocomposite SmartPanels(TM)
Fiore, D
Gentilman, R
Pham, H
Serwatka, W
McGuire, P
Near, C
Bowen, L
INDUSTRIAL AND COMMERCIAL APPLICATIONS OF SMART STRUCTURES TECHNOLOGIES: SMART STRUCTURES AND MATERIALS 1997, 1997, 3044 : 391 - 396
[40] Electroacoustic response of 1-3 piezocomposite transducers for high power applications
Lee, Hyeong Jae
Zhang, Shujun
Geng, Xuecang
Shrout, Thomas R.
APPLIED PHYSICS LETTERS, 2012, 101 (25)

← 1 2 3 4 5 →