Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters

被引：0
|
作者：
Liu, Changyi [1 ]
Chu, Chenglong [1 ]
Zhou, Wenhui [1 ]
Yi, Junjie [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China
来源：
PROGRESS OF MACHINING TECHNOLOGY | 2009年 / 407-408卷
关键词：
Flank milling; TC11 Titanium alloy; Taguchi method; Machining parameters; OPTIMIZATION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.
引用
收藏
页码：608 / 611
页数：4
相关论文
共 50 条
  • [1] Optimization of Milling Tool Parameters and Experimental Research on Titanium Alloy TC11
    Liu, Erliang
    Wang, Ruyue
    Wen, Qian
    Deng, Shuang
    [J]. INTEGRATED FERROELECTRICS, 2023, 233 (01) : 28 - 41
  • [2] Study on Surface Integrity in milling of TC11 Titanium Impellers
    Wu, Zegang
    Hou, Yongfeng
    Miao, Qing
    Li, Jing
    Zhang, Dinghua
    Luo, Ming
    [J]. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2023, 34 (23): : 2862 - 2872
  • [3] Robust design of flank milling parameters based on grey-Taguchi method
    Kopac, J.
    Krajnik, P.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 191 (1-3) : 400 - 403
  • [4] Sensitivity Analysis of The Influence of Milling Parameters on The Surface Residual Stress of Titanium Alloy TC11
    Tian, WeiJun
    Li, Yu
    Ren, JunXue
    Yao, ChangFeng
    [J]. 9TH INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY - INTELLIGENT MANUFACTURING IN THE KNOWLEDGE ECONOMY ERA, 2016, 56 : 149 - 154
  • [5] Study on surface morphology and residual stress in inclined milling of titanium alloy TC11
    Yanxuan Song
    Hongxu Chen
    Yiheng Tang
    Shuo Huang
    Guofu Yin
    Ming Yin
    [J]. The International Journal of Advanced Manufacturing Technology, 2022, 122 : 3411 - 3423
  • [6] Study on surface morphology and residual stress in inclined milling of titanium alloy TC11
    Song, Yanxuan
    Chen, Hongxu
    Tang, Yiheng
    Huang, Shuo
    Yin, Guofu
    Yin, Ming
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (7-8): : 3411 - 3423
  • [7] The Study of Residual Stresses in High-Speed Milling of Titanium Alloy TC11
    Yao, Changfeng
    Yang, Zhenchao
    Huang, Xinchun
    Ren, Junxue
    Zhang, Dinghua
    [J]. MANUFACTURING SCIENCE AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 443-444 : 160 - 165
  • [8] Microstructure Homogeneity Evaluation for TC11 Blisk Forgling Using Loss Function Based on Taguchi Method
    Yang Yanhui
    Liu Dong
    Luo Zijian
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (04) : 565 - 570
  • [9] The superplasticity and microstructure evolution of TC11 titanium alloy
    Sun, Qian Jiang
    Wang, G. C.
    Li, M. Q.
    [J]. MATERIALS & DESIGN, 2011, 32 (07): : 3893 - 3899
  • [10] Characterization of (α plus β)/β transformation in a TC11 titanium alloy
    Geng, L.
    Xu, B.
    Li, Y. T.
    Li, A. B.
    Wang, G. S.
    [J]. DESIGNING OF INTERFACIAL STRUCTURES IN ADVANCED MATERIALS AND THEIR JOINTS, 2007, 127 : 91 - +
12345