Optimization of Milling Tool Parameters and Experimental Research on Titanium Alloy TC11

被引:1
|
作者
Liu, Erliang [1 ]
Wang, Ruyue [2 ]
Wen, Qian [3 ]
Deng, Shuang [2 ]
机构
[1] Changzhou Univ, Sch Mech Engn & Rail Transit, Changzhou, Peoples R China
[2] Harbin Univ Sci & Technol, Coll Mech & Power Engn, Harbin, Peoples R China
[3] Beijing Res Inst Automat Machinery Ind Co Ltd, Beijing, Peoples R China
基金
中国国家自然科学基金;
关键词
Titanium alloy milling; optimal selection of cutting parameter; finite element simulation; cutting force;
D O I
10.1080/10584587.2023.2191512
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Because of its high strength and poor thermal conductivity, TC11 alloy has some problems such as high cutting force and serious tool wear. To solve the problems, the finite element simulation and milling TC11 experiment are combined to research tool selection, cutting force, cutting vibration, and so on. First of all, the simulation and experiment of the cutting force are carried out, the prediction model is established, and the cutter parameters are optimized; Secondly, the milling experiment is carried out to compare and analyze the change rules of force and vibration when cutting with an optimized milling cutter and conventional cutter, and the best cutting parameters are selected; Finally, the tool life of milling TC11 under different cooling and lubrication conditions is explored.
引用
收藏
页码:28 / 41
页数:14
相关论文
共 50 条
  • [1] Experimental evaluation of polycrystalline diamond (PCD) tool geometries at high feed rate in milling of titanium alloy TC11
    Ji, Wei
    Liu, Xianli
    Wang, Lihui
    Sun, Shilong
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (9-12): : 1549 - 1555
  • [2] Experimental evaluation of polycrystalline diamond (PCD) tool geometries at high feed rate in milling of titanium alloy TC11
    Wei Ji
    Xianli Liu
    Lihui Wang
    Shilong Sun
    [J]. The International Journal of Advanced Manufacturing Technology, 2015, 77 : 1549 - 1555
  • [3] Sensitivity Analysis of The Influence of Milling Parameters on The Surface Residual Stress of Titanium Alloy TC11
    Tian, WeiJun
    Li, Yu
    Ren, JunXue
    Yao, ChangFeng
    [J]. 9TH INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY - INTELLIGENT MANUFACTURING IN THE KNOWLEDGE ECONOMY ERA, 2016, 56 : 149 - 154
  • [4] Optimization of high temperature deformation parameters of titanium alloy TC11 by using Murty criterion
    Li Xin
    Lu Shiqiang
    Wang Kelu
    Zhao Weigang
    Li Zhenxi
    Cao Chunxiao
    [J]. ACTA METALLURGICA SINICA, 2007, 43 (12) : 1268 - 1274
  • [5] Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters
    Liu, Changyi
    Chu, Chenglong
    Zhou, Wenhui
    Yi, Junjie
    [J]. PROGRESS OF MACHINING TECHNOLOGY, 2009, 407-408 : 608 - 611
  • [6] Study on surface morphology and residual stress in inclined milling of titanium alloy TC11
    Yanxuan Song
    Hongxu Chen
    Yiheng Tang
    Shuo Huang
    Guofu Yin
    Ming Yin
    [J]. The International Journal of Advanced Manufacturing Technology, 2022, 122 : 3411 - 3423
  • [7] Study on surface morphology and residual stress in inclined milling of titanium alloy TC11
    Song, Yanxuan
    Chen, Hongxu
    Tang, Yiheng
    Huang, Shuo
    Yin, Guofu
    Yin, Ming
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (7-8): : 3411 - 3423
  • [8] The Study of Residual Stresses in High-Speed Milling of Titanium Alloy TC11
    Yao, Changfeng
    Yang, Zhenchao
    Huang, Xinchun
    Ren, Junxue
    Zhang, Dinghua
    [J]. MANUFACTURING SCIENCE AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 443-444 : 160 - 165
  • [9] Optimization of TC11 alloy forging parameters using processing maps
    Miaoquan Li
    Xiaoyuan Zhang
    [J]. Rare Metals, 2011, 30 : 222 - 226
  • [10] Optimization of TC11 alloy forging parameters using processing maps
    LI Miaoquan and ZHANG Xiaoyuan School of Materials Science and Engineering
    [J]. Rare Metals, 2011, 30 (03) : 222 - 226