Mechanical Properties of Poly 3C-SiC Thin Films according to Carrier Gas (H2) Concentration

被引：1

作者：

Chung, Gwiy-Sang ^{[1
]}

Han, Ki-Bong ^{[1
]}

机构：

[1] Univ Ulsan, Sch Elect Engn, Ulsan, South Korea

来源：

SILICON CARBIDE AND RELATED MATERIALS 2007, PTS 1 AND 2 | 2009年 / 600-603卷

关键词：

Poly; 3C-SiC; Nano Indentation; AFM; Young's Modulus; Hardness; BULGE TEST; MODULUS; RATIO;

D O I：

10.4028/www.scientific.net/MSF.600-603.867

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This paper presents the mechanical properties of 3C-SiC thin film according to 0, 7, and 10 % carrier gas (H(2)) concentrations using Nano-Indentation. When carrier gas (H(2)) concentration was 10 %, it has been proved that the mechanical properties, Young's Modulus and Hardness, of 3C-SiC are the best of them. In the case of 10 % carrier gas (H(2)) concentration, Young's Modulus and Hardness were obtained as 367 GPa and 36 GPa, respectively. When the surface roughness according to carrier gas (H(2)) concentrations was investigated by AFM (atomic force microscope), when carrier gas (H(2)) concentration was 10 %, the roughness of 3C-SiC thin was 9.92 nm, which is also the best of them. Therefore, in order to apply poly 3C-SiC thin films to MEMS applications, carrier gas (H(2)) concentration's rate should increase to obtain better mechanical properties and surface roughness.

引用

页码：867 / 870

页数：4

共 50 条

[1] H2 carrier gas dependence of Young's modulus and hardness of chemical vapor deposited polycrystalline 3C-SiC thin films
Chung, Gwiy-Sang
Han, Ki-Bong
MICROELECTRONICS JOURNAL, 2008, 39 (12) : 1413 - 1415
[2] Micromachining of thin 3C-SiC films for mechanical properties investigation
Michaud, J. F.
Jiao, S.
Bazin, A. E.
Portail, M.
Chassagne, T.
Zielinski, M.
Alquier, D.
B - SILICON CARBIDE 2010-MATERIALS, PROCESSING AND DEVICES, 2010, 1246
[3] Mechanical Properties of In-Situ Doped Polycrystalline 3C-SiC Thin Films
Jeong, Jae-Min
Lee, Jong-Haw
Chung, Gwiy-Sang
IFOST 2008: PROCEEDING OF THE THIRD INTERNATIONAL FORUM ON STRATEGIC TECHNOLOGIES, 2008, : 198 - 201
[4] Mechanical properties of 3C-SiC films for MEMS applications
Reddy, Jayadeep Deva
Volinsky, Alex A.
Frewin, Christopher L.
Locke, Chris
Saddow, Stephen E.
FUNDAMENTALS OF NANOINDENTATION AND NANOTRIBOLOGY IV, 2008, 1049 : 41 - +
[5] Characteristics of polycrystalline 3C-SiC thin films grown with carrier gas for extreme environment microelectronics
Chung, Gwiy-Sang
Kim, Kang-San
2008 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, VOLS 1-5, 2008, : 522 - 527
[6] 3C-SiC Films on Si for MEMS Applications: Mechanical Properties
Locke, C.
Kravchenko, G.
Waters, P.
Reddy, J. D.
Du, K.
Volinsky, A. A.
Frewin, C. L.
Saddow, S. E.
SILICON CARBIDE AND RELATED MATERIALS 2008, 2009, 615-617 : 633 - 636
[7] Evaluation of microindentation properties of epitaxial 3C-SiC/Si thin films
Geetha, D.
Sophia, P. Joice
Arivuoli, D.
PHYSICA B-CONDENSED MATTER, 2016, 490 : 86 - 89
[8] Electrical and Mechanical Characterization of Doped and Annealed Polycrystalline 3C-SiC Thin Films
Roper, Christopher S.
Radmilovic, Velimir
Howe, Roger T.
Maboudian, Roya
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2009, 156 (01) : D5 - D10
[9] Electronic properties of 3C-SiC films grown by alternate gas supply
Nagasawa, H
Mitsui, H
Kawahara, T
Yagi, K
Yamaguchi, Y
SILICON CARBIDE AND RELATED MATERIALS 1995, 1996, 142 : 141 - 144
[10] Mechanical Properties and Residual Stress of Thin 3C-SiC(111) Films Determined using MEMS Structures
Haehnlein, Bernd
Stubenrauch, Mike
Michael, Steffen
Pezoldt, Joerg
SILICON CARBIDE AND RELATED MATERIALS 2013, PTS 1 AND 2, 2014, 778-780 : 444 - +

← 1 2 3 4 5 →