Hydrogen effects on the microstructure of a 2.25Cr-1Mo-0.25 V steel welded joint

被引：42

作者：

Pereira, P. A. S. ^{[1
]}

Franco, C. S. G. ^{[1
]}

Guerra Filho, J. L. M. ^{[1
]}

dos Santos, D. S. ^{[1
]}

机构：

[1] Univ Fed Rio de Janeiro, PEMM COPPE, BR-21941972 Rio De Janeiro, RJ, Brazil

来源：

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY | 2015年 / 40卷 / 47期

关键词：

2.25Cr-1Mo-0.25 V steel; Hydrogen embrittlement; Hydrogen permeability; Mechanical properties; STRESS STATES; SOLUBILITY;

D O I：

10.1016/j.ijhydene.2015.07.095

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The effect of hydrogen in a 2.25Cr-1Mo-0.25 V steel welded joint was studied using tensile mechanical and hydrogen permeation tests. Hydrogen diffusivity and solubility were determined by electrochemical (room temperature) and gas permeation (350-500 degrees C) tests. The hydrogen permeation curve for the base metal, at room temperature exhibited a strong deviation of sigmoidal shape indicating the influence of deep traps as martensite and austenite phases. The hydrogen solubility at room temperature obtained for the base material was equal to 21.8 molH m(-3). At high temperatures (350-500 degrees C) the apparent hydrogen diffusivity was: D = 1.3.10(-6) exp (-3 2.2 4kJ/mol /RT)m(2) S-1 for the base metal and D = 2.0.10(-7)exp (-27,3+/-3kJ/mol/RT)m(2) s(-1) for the weld metal. Stress strain tests revealed that in the hydrogenated samples, applying elastic stress, there was increase of hydrogen embrittlement of this alloy due to the enhancement of hydrogen solubility. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

引用

页码：17136 / 17143

页数：8

共 50 条

[21] Effects of heat treatment processes on microstructure and properties of 2.25Cr-1Mo-0.25V HSLA steels
Fu, R. D.
Wu, S. F.
Zhou, W. H.
Zhang, W. H.
Yang, Y. Q.
Zhang, F. C.
MATERIALS SCIENCE AND TECHNOLOGY, 2009, 25 (01) : 50 - 55
[22] INFLUENCE OF MICROSTRUCTURE ON HYDROGEN EMBRITTLEMENT BEHAVIOR OF 2.25CR-1MO STEEL
VALENTINI, R
SOLINA, A
MATERIALS SCIENCE AND TECHNOLOGY, 1994, 10 (10) : 908 - 914
[23] Effect of Cementite on the Hydrogen Diffusion/Trap Characteristics of 2.25Cr-1Mo-0.25V Steel with and without Annealing
Song, Yan
Han, Zelin
Chai, Mengyu
Yang, Bin
Liu, Yilun
Cheng, Guangxu
Li, Yun
Ai, Song
MATERIALS, 2018, 11 (05)
[24] RESEARCH ON REHEAT CRACKING CRITERION OF CGHAZ IN 2.25CR1MO0.25V STEEL
Liu, Chang-Jun
Zhou, Shuang
Tan, Jian-Ping
Zhang, Hao-Yu
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 1B, 2019,
[25] Characterization of microstructures of 2.25Cr-1Mo-0.25V steel after quenching and tempering
Zhong, Yong-Tao
Gao, Jia-Qiang
Zhang, Han-Qian
Li, Jin-Fu
Cailiao Kexue yu Gongyi/Material Science and Technology, 2008, 16 (SUPPL. 1): : 64 - 67
[26] EFFECT OF PLASTIC DEFORMATION ON HYDROGEN EMBRITTLEMENT SENSITIVITY AND STRENGTH OF 2.25CR1MO0.25V STEEL BY SYNCHRONOUS HYDROGEN CHARGING
Li, Qing
Hu, Yuqi
Cheng, Guangxu
Zhang, Zaoxiao
Liang, Xiaowu
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 1, 2019,
[27] Tools Optimization in Efficient Intermittent Cutting of 2.25Cr1Mo0.25V Steel
Liu, H. L.
Lv, X.
Huang, C. Z.
Yin, Z. B.
Zou, B.
Zhu, H. T.
HIGH SPEED MACHINING, 2011, 188 : 469 - 474
[28] The evolutions of microstructure and mechanical properties of 2.25Cr-1Mo-0.25V steel with different initial microstructures during tempering
Jiang, Zhonghua
Wang, Pei
Li, Dianzhong
Li, Yiyi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 699 : 165 - 175
[29] Impact of Hot Bending on the High-Temperature Performance and Hydrogen Damage of 2.25Cr-1Mo-0.25V Steel
Huang, Song
Chen, Zhiping
Li, You
Zhang, Delin
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (01) : 567 - 577
[30] Quantitative assessment of the hydrogen induced cracking for 2.25Cr-1Mo-0.25V steel under electrochemical charging conditions
Wang, Y. F.
Hu, S. Y.
Tian, Z. Q.
Cheng, G. X.
ENGINEERING FAILURE ANALYSIS, 2021, 124

← 1 2 3 4 5 →