3D-Printed Frequency Selective Surfaces for Microwave Absorbers

被引：0
|
作者：
Kronberger, Rainer [1 ]
Soboll, Patrick [1 ]
机构：
[1] TH Koeln Univ Technol Arts & Sci, High Frequency Lab, Betzdorfer Str 2, D-50679 Cologne, Germany
来源：
2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP) | 2016年
关键词：
3D-Printing; printed absorber; FSS;
D O I：
暂无
中图分类号：
TN [电子技术、通信技术];
学科分类号：
0809 ;
摘要：
A flat periodic FSS (frequency selective surface) is presented, which is fully fabricated by a 3D-printer and commercial 3D printing filaments which normally are used for printing metal like structures. The FSS absorber structure was developed and optimized for 10 GHz, fabricated with the 3D printer, measured afterwards and compared with the simulations. Further simulations were made with the new materials at higher frequencies and the results confirm that 3D printing technology works well and could be used to the best advantage for absorbers and other applications in the frequency range below 100 GHz.
引用
收藏
页码：178 / 179
页数：2
相关论文
共 50 条
  • [31] THz and microwave properties of 3D-printed nanocarbon based multilayers
    Kuzhir, P.
    Paddubskaya, A.
    Volynets, N.
    Kotsilkova, R.
    Ivanov, E.
    Biro, I.
    Mark, G. I.
    Biro, L. P.
    Maksimenko, S.
    2017 INTERNATIONAL CONFERENCE ON ELECTROMAGNETICS IN ADVANCED APPLICATIONS (ICEAA), 2017, : 822 - 823
  • [32] Tunable Microwave Filter Based on Hemispherical 3D-Printed Resonators
    Olaru, Artiom
    Delmonte, Nicole
    Marconi, Stefania
    Alaimo, Gianluca
    Auricchio, Ferdinando
    Bozzi, Maurizio
    2022 24TH INTERNATIONAL MICROWAVE AND RADAR CONFERENCE (MIKON), 2022,
  • [33] 3D-printed slit nozzles for Fourier transform microwave spectroscopy
    Dewberry, Christopher T.
    Mackenzie, Rebecca B.
    Green, Susan
    Leopold, Kenneth R.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2015, 86 (06):
  • [34] 3D-printed λ/4 phase plate for broadband microwave applications
    Wu, Yingwei
    Grant, Patrick S.
    Isakov, Dmitry
    OPTICS EXPRESS, 2018, 26 (22): : 29068 - 29073
  • [35] Optimizing the macrostructure of 3D-printed pipe surfaces to improve cleanability
    Hanisch, Tobias
    Joppa, Matthias
    Eisenrauch, Vincent
    Jacob, Sebastian
    Mauermann, Marc
    HEAT AND MASS TRANSFER, 2024, 60 (05) : 887 - 895
  • [36] Optimizing the macrostructure of 3D-printed pipe surfaces to improve cleanability
    Tobias Hanisch
    Matthias Joppa
    Vincent Eisenrauch
    Sebastian Jacob
    Marc Mauermann
    Heat and Mass Transfer, 2024, 60 : 887 - 895
  • [37] 3D frequency selective surfaces
    Azemi, S. N. (snorlyana@yahoo.com), 2012, Electromagnetics Academy (29)
  • [38] 3D-printed polarization-independent low-cost flexible frequency selective surface based dual-band microwave absorber
    Chaitanya, Gaurav
    Peshwe, Paritosh
    Ghosh, Saptarshi
    Kothari, Ashwin
    INTERNATIONAL JOURNAL OF MICROWAVE AND WIRELESS TECHNOLOGIES, 2024,
  • [39] 3D-printed minimalists
    Gross, Heinz
    Gross, Sebastian
    Nobrega, Miguel J.
    Vidal, Joao P.O.
    Kunststoffe International, 2019, 109 (1-2): : 40 - 43
  • [40] A 3D-Printed Computer
    Shirmohammadli, Vahideh
    Bahreyni, Behraad
    ADVANCED INTELLIGENT SYSTEMS, 2023, 5 (08)
12345