3D-Printed Frequency Selective Surfaces for Microwave Absorbers

被引：0
|
作者：
Kronberger, Rainer [1 ]
Soboll, Patrick [1 ]
机构：
[1] TH Koeln Univ Technol Arts & Sci, High Frequency Lab, Betzdorfer Str 2, D-50679 Cologne, Germany
来源：
2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP) | 2016年
关键词：
3D-Printing; printed absorber; FSS;
D O I：
暂无
中图分类号：
TN [电子技术、通信技术];
学科分类号：
0809 ;
摘要：
A flat periodic FSS (frequency selective surface) is presented, which is fully fabricated by a 3D-printer and commercial 3D printing filaments which normally are used for printing metal like structures. The FSS absorber structure was developed and optimized for 10 GHz, fabricated with the 3D printer, measured afterwards and compared with the simulations. Further simulations were made with the new materials at higher frequencies and the results confirm that 3D printing technology works well and could be used to the best advantage for absorbers and other applications in the frequency range below 100 GHz.
引用
收藏
页码：178 / 179
页数：2
相关论文
共 50 条
  • [1] Novel 3D-Printed Reconfigurable Origami Frequency Selective Surfaces With Flexible Inkjet-Printed Conductor Traces
    Cui, Yepu
    Nauroze, Syed Abdullah
    Tentzeris, Manos M.
    2019 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2019, : 1367 - 1370
  • [2] INTRICATE 3D-PRINTED POROUS SURFACES
    Zhang, Yihui
    ADVANCED MATERIALS & PROCESSES, 2023, 181 (04): : 72 - 72
  • [3] A Simple Technique to Analysis of Microwave Absorbers using Frequency Selective Surfaces
    dos Santos, Eliel Poggi
    Campos, Antonio Luiz P. S.
    2015 SBMO/IEEE MTT-S INTERNATIONAL MICROWAVE AND OPTOELECTRONICS CONFERENCE (IMOC), 2015,
  • [4] 3D-Printed Multiband Absorber Based on Stereo Frequency Selective Structures
    Deng, Guangsheng
    Sun, Hanxiao
    Lv, Kun
    Yang, Jun
    Yin, Zhiping
    Chi, Baihong
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2021, 218 (07):
  • [5] DESIGN OF THIN MICROWAVE ABSORBERS USING LOSSY FREQUENCY SELECTIVE SURFACES
    Silva, M. W. B.
    Campos, A. L. P. S.
    Kretly, L. C.
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2015, 57 (04) : 928 - 933
  • [6] Selective Electroplating for 3D-Printed Electronics
    Lazarus, Nathan
    Bedair, Sarah S.
    Hawasli, Sami H.
    Kim, Myung Jun
    Wiley, Benjamin J.
    Smith, Gabriel L.
    ADVANCED MATERIALS TECHNOLOGIES, 2019, 4 (08)
  • [7] 3D-printed sound absorbers: compact and customisable at broadband frequencies
    F. Setaki
    F. Tian
    Michela Turrin
    M. Tenpierik
    L. Nijs
    A. van Timmeren
    Architecture, Structures and Construction, 2023, 3 (2): : 205 - 215
  • [8] Study of 3D printed HoneyComb Microwave Absorbers
    Vincent, Laur
    Azar, Maalouf
    Alexis, Chevalier
    Frabrice, Comblet
    2019 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND USNC-URSI RADIO SCIENCE MEETING, 2019, : 1981 - 1982
  • [9] Design, Experimental and Numerical Characterization of 3D-Printed Porous Absorbers
    Ring, Tobias P.
    Langer, Sabine C.
    MATERIALS, 2019, 12 (20)
  • [10] 3D-Printed Flat Lens for Microwave Applications
    Zhang, Shiyu
    Vardaxoglou, Yiannis
    Whittow, Will
    Mittra, Raj
    2015 LOUGHBOROUGH ANTENNAS & PROPAGATION CONFERENCE (LAPC), 2015,
12345