THE RESEARCH OF THE THERMAL AND MECHANICAL PROPERTIES OF MATERIALS PRODUCED BY 3D PRINTING METHOD

被引：4
|
作者：
Gnatowski, Adam [1 ]
Kijo-Kleczkowska, Agnieszka [2 ]
Otwinowski, Henryk [2 ]
Sikora, Piotr [1 ]
机构：
[1] Czestochowa Tech Univ, Inst Mech Technol, Czestochowa, Poland
[2] Czestochowa Tech Univ, Inst Thermal Machinery, Czestochowa, Poland
来源：
THERMAL SCIENCE | 2019年 / 23卷
关键词：
thermal properties; mechanical properties; polymer materials; 3D printing;
D O I：
10.2298/TSCI19S4211G
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
A comparative analysis of thermal properties of semi-crystalline and amorphous polymeric materials was carried out. Samples were produced using 3D printing technology on the SIGNAL-ATMAT printer. The following polymeric materials were used to make the samples: thermoplastic polyurethane elastomer, acrylonitrile-butadiene-styrene copolymer, Laywood, ethylene terephthalate, poly (lactic acid). The materials were tested for their thermal and mechanical properties. The research included the analysis of thermal properties by differential scanning calorimetry of manufactured materials. The tensile strength also was determined.
引用
收藏
页码：S1211 / S1216
页数：6
相关论文
共 50 条
  • [31] Study of the Thermal Properties of Filaments for 3D Printing
    Trhlikova, Lucie
    Zmeskal, Oldrich
    Psencik, Petr
    Florian, Pavel
    [J]. THERMOPHYSICS 2016: 21ST INTERNATIONAL MEETING, 2016, 1752
  • [32] Mechanical properties test and simulation research of 3D printing lattice material struts
    Zhang, Mingyang
    Ma, Bowen
    [J]. INTERNATIONAL CONFERENCE ON MECHANICAL DESIGN AND SIMULATION (MDS 2022), 2022, 12261
  • [33] Research on Properties of Silicone-Modified Epoxy Resin and 3D Printing Materials
    Yan, Zhen-Guo
    Wang, Zhen-Ping
    Liu, Ying-Ying
    Xiao, Yang
    Yue, Ning
    [J]. ACS OMEGA, 2023, 8 (25): : 23044 - 23050
  • [34] Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
    Zubrzycki, Jaroslaw
    Quirino, Estrada
    Staniszewski, Michal
    Marchewka, Magdalena
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2022, 16 (05) : 52 - 63
  • [35] The advantages of 3D printing in undergraduate Mechanical Engineering research
    Pieterse, F. F.
    Nel, A. L.
    [J]. PROCEEDINGS OF 2016 IEEE GLOBAL ENGINEERING EDUCATION CONFERENCE (EDUCON2016), 2016, : 25 - 31
  • [36] Research on Application of 3D Printing Materials in Product Design
    Du, Yifeng
    [J]. PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ARTS, DESIGN AND CONTEMPORARY EDUCATION (ICADCE 2017), 2017, 144 : 501 - 503
  • [37] Influence of carbon nanotubes on printing quality and mechanical properties of 3D printed cementitious materials
    Ali, Mohd Mukarram
    Nassrullah, Ghaith
    Al-Rub, Rashid K. Abu
    El-Khasawneh, Bashar
    Ghaffar, Seyed Hamidreza
    Kim, Tae-Yeon
    [J]. DEVELOPMENTS IN THE BUILT ENVIRONMENT, 2024, 18
  • [38] Mechanical Properties of Carbon Fiber Reinforced Materials for 3D Printing of Ankle Foot Orthoses
    Rybarczyk, Justyna
    Gorski, Filip
    Kuczko, Wieslaw
    Wichniarek, Radowslaw
    Siwiec, Sabina
    Vitkovic, Nikola
    Pacurar, Razvan
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (04) : 191 - 215
  • [39] Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials
    Shen, Yuhang
    Lin, Li
    Wei, Shengjie
    Yan, Jie
    Xu, Tianli
    [J]. BUILDINGS, 2022, 12 (12)
  • [40] Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
    Weng, Zixiang
    Wang, Jianlei
    Senthil, T.
    Wu, Lixin
    [J]. MATERIALS & DESIGN, 2016, 102 : 276 - 283
12345