Investigations on Nanolaminated TiZrN/CrN as a Tribological PVD Hard Coating for Incremental Sheet Forming Tools

被引：3
|
作者：
Bobzin, Kirsten [1 ]
Bagcivan, Nazlim [1 ]
Ewering, Mara [1 ]
Warnke, Carsten [1 ]
机构：
[1] Univ Aachen, Rhein Westfal TH Aachen, Surface Engn Inst IOT, D-52062 Aachen, Germany
来源：
ADVANCED ENGINEERING MATERIALS | 2009年 / 11卷 / 08期
关键词：
METAL; FORMABILITY;
D O I：
10.1002/adem.200900088
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The development and tribological examinations of physical vapor deposition (PVD) tool coatings for incremental sheet forming processes, was investigated. The tribological examinations were carried out using deep drawing steel specimens of 20 and 6mm diameter, convex mirror-polished tool steel pins as tool counter partners. Tool steel circular blanks as well as half flat carbide cutting inserts were used as substrates for coating development purpose. Regarding the sheet metal forming process, the PVD coating introduced was deposited on convex tool steel counter partner pins for use in the tribometer set-up. According to the results presented, the wear rate increases with increasing measurement temperature. The coated specimen shows several small wear marks, but none with an assessed wear diameter larger than 120 μm. Overall, the counter partner wear rates significantly differ when comparing the non-lubricated tribometer measurements using non-coated counter partners with lubricated measurements using PVD-coated counter partners.
引用
收藏
页码：674 / 679
页数：6
相关论文
共 50 条
  • [21] IMPROVEMENT OF COLD FORMING AND FORM CUTTING TOOLS BY PVD TIN COATING
    NAVINSEK, B
    ZABKAR, A
    VACUUM, 1986, 36 (1-3) : 111 - 115
  • [22] CrN-based wear resistant hard coatings for machining and forming tools
    Yang, S.
    Cooke, K. E.
    Li, X.
    McIntosh, F.
    Teer, D. G.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2009, 42 (10)
  • [23] Comparative Study of Incremental Forming and Elevated Temperature Incremental Forming Through Experimental Investigations on AA 1050 Sheet
    Singh, Swarit Anand
    Priyadarshi, Satwik
    Tandon, Puneet
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2021, 143 (06):
  • [24] Tribological behavior of PVD hard coated cutting tools under cryogenic cooling conditions
    Yousfi, M.
    Outeiro, J. C.
    Nouveau, C.
    Marcon, B.
    Zouhair, B.
    16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 2017, 58 : 561 - 565
  • [25] Analysis of incremental sheet forming parameters and tools aimed at rapid prototyping
    Silva, P. J.
    Leodido, L. M.
    Silva, C. R. M.
    CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 2285 - 2292
  • [26] Investigations on the deformation mechanism of a novel three-sheet incremental forming
    Chang, Zhidong
    Chen, Jun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 281 (281)
  • [27] Further experimental investigations and FEM model development in Sheet Incremental Forming
    Giardini, C.
    Ceretti, E.
    Attanasio, A.
    SHEET METAL 2005, 2005, 6-8 : 501 - 508
  • [28] INCREMENTAL SHEET FORMING WITH LOCAL HEATING FOR LIGHTWEIGHT HARD-TO-FORM MATERIAL
    Hino, R.
    Yoshida, F.
    Nagaishi, N.
    Naka, T.
    ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE, 2009, : 710 - +
  • [29] INCREMENTAL SHEET FORMING WITH LOCAL HEATING FOR LIGHTWEIGHT HARD-TO-FORM MATERIAL
    Hino, R.
    Yoshida, F.
    Nagaishi, N.
    Naka, T.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (31-32): : 6082 - 6087
  • [30] The analysis of complex tribological system of single point incremental sheet metal forming - SPIF
    Petek, Ales
    Podgornik, Bojan
    Kuzman, Karl
    Cekada, Miha
    Waldhauser, Wolfgang
    Vizintin, Jozef
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2008, 54 (04): : 266 - 273
12345