Heat and mass transfer in wood composite panels during hot pressing: Part 3. Predicted variations and interactions of the pressing variables

被引：12

作者：

Yu, Changming ^{[1
]}

Dai, Chunping ^{[1
]}

Wang, Brad Jianhe ^{[1
]}

机构：

[1] Forintek Canada Corp, Composites Grp, Vancouver, BC V6T 1W5, Canada

来源：

HOLZFORSCHUNG | 2007年 / 61卷 / 01期

关键词：

computer simulation; heat and mass transfer; hot pressing; modeling; wood composites;

D O I：

10.1515/HF.2007.012

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

As a continuation of previous publications on a physical-mathematical model of heat and mass transfer and a structural model of mat permeability, this paper presents typical prediction results for 15 pressing variables for strand mats. A case study and complete solutions to the governing equations are provided. The results show how the heat and mass transfer is controlled by heat conduction and convection involving gas flow and phase change. The model predictions provide a comprehensive illustration of the temporal and spatial variations of basic pressing variables, including mat temperature, gas pressure, moisture control and resin curing rate. The model offers a powerful tool for simulating the effects of mat structure, pressing schedule and initial mat conditions.

引用

页码：74 / 82

页数：9

共 50 条

[41] Analysis of Mass and Heat Transfer Characteristics of Potato and Oat Composite Noodles during Combined Heat Pump-Hot Air Drying
Qu, Zhanping
Ren, Guangyue
Zhang, Yingmin
Duan, Xu
Zhang, Ledao
Shipin Kexue/Food Science, 2020, 41 (05): : 57 - 65
[42] Cellular Vibropneumatic Compacted Corundum. Part 3. Selection of Pressing Force and Order of Application During Vibration Treatment of Alumina-Foam Polystyrene Mixtures
Sokov, V. N.
Sokova, S. D.
REFRACTORIES AND INDUSTRIAL CERAMICS, 2022, 62 (05) : 561 - 563
[43] Cellular Vibropneumatic Compacted Corundum. Part 3. Selection of Pressing Force and Order of Application During Vibration Treatment of Alumina-Foam Polystyrene Mixtures
V. N. Sokov
S. D. Sokova
Refractories and Industrial Ceramics, 2022, 62 : 561 - 563
[44] Modeling the physical processes relevant during hot pressing of wood-based composites. Part I. Heat and mass transferModellierung der physikalischen Vorgänge beim Heisspressen von Holzwerkstoffen. Teil I. Wärme- und Stofftransport
Heiko Thoemen
Philip E. Humphrey
Holz als Roh- und Werkstoff, 2006, 64 (1) : 1 - 10
[45] A 3-Dimensional Body Fitted Simulation of Heat and Mass Transfer in Rice Kernel during Hot Air Drying Process
Zhao, Lijuan
Yang, Junhong
Du, Tengfei
Wu, Zhonghua
INTERNATIONAL JOURNAL OF FOOD ENGINEERING, 2019, 15 (3-4)
[46] PRODUCING NI3AL MATRIX COMPOSITE-MATERIAL BY VACUUM HOT-PRESSING AND HEAT-TREATMENT OF NICKEL-PLATED ALUMINUM SHEETS WITH AL2O3 FIBER
KESAPRADIST, J
ONO, K
FUKAURA, K
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 153 (1-2): : 641 - 645
[47] Influence of Electrohydrodynamic Flows on Intensification of Heat- and Mass-Transfer Processes: Part 3. Electroconvection and Electrohydrodynamic Pumps in the Cooling and Thermostating Systems
I. V. Kozhevnikov
M. K. Bologa
F. P. Grosu
Surface Engineering and Applied Electrochemistry, 2023, 59 : 59 - 78
[48] Influence of Electrohydrodynamic Flows on Intensification of Heat- and Mass-Transfer Processes: Part 3. Electroconvection and Electrohydrodynamic Pumps in the Cooling and Thermostating Systems
Kozhevnikov, I. V.
Bologa, M. K.
Grosu, F. P.
SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2023, 59 (01) : 59 - 78
[49] Modeling the physical processes relevant during hot pressing of wood-based composites. Part II. RheologyModellierung der physikalischen Vorgänge beim Heisspressen von Holzwerkstoffen. Teil 2. Rheologie
Heiko Thoemen
Clovis R. Haselein
Philip E. Humphrey
Holz als Roh- und Werkstoff, 2006, 64 : 125 - 133
[50] 3D simulation of momentum, heat and mass transfer in potato cubes during intermittent microwave-convective hot air drying
Maryam Khakbaz Heshmati
Hadi Dehghani Khiavi
Jalal Dehghannya
Hamed Baghban
Heat and Mass Transfer, 2023, 59 : 239 - 254

← 1 2 3 4 5 →