Production of Sm-Fe-N bulk magnets by spark plasma sintering method

被引：25
|
作者：
Saito, Tetsuji [1 ]
机构：
[1] Chiba Inst Technol, Dept Mech Sci & Engn, Narashino, Chiba 2750016, Japan
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2014年 / 369卷
关键词：
Rare-earth permanent magnets; Spark plasma sintering; Magnetic properties; POWDERS; COMPRESSION; COMPACTION;
D O I：
10.1016/j.jmmm.2014.06.034
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Th2Zn17-type and TbCu7-type Sm-Fe-N powder were consolidated into bulk magnets by the spark plasma sintering (SPS) method. It was found that the coarse TbCu7-type Sm-Fe-N powder possessed greater stability during sintering than the One Th2Zn17-type Sm-Fe-N powder. Although the TbCu7-type magnets produced at temperatures exceeding 773 K showed a low coercivity comparable to that of the Th2Zn17-type magnets, they exhibited a higher coercivity than the Th2Zn17-type magnets when produced at 773 K or lower. The TbCu7-type magnet produced at 773 K exhibited a high remanence of 96.4 Am-2/kg with a high coercivity of 0.72 MA/m. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：184 / 188
页数：5
相关论文
共 50 条
  • [21] Microstructural characterization of α-Fe/Sm-Fe-N nanocomposite hard magnets
    Ping, DH
    Hono, K
    Hidaka, T
    Yamamoto, T
    Fukuno, A
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2004, 277 (03) : 337 - 343
  • [22] Magnetic properties of Sm5Fe17/Fe composite magnets produced by spark plasma sintering method
    Saito, Tetsuji
    Miyoshi, Hiroya
    JOURNAL OF APPLIED PHYSICS, 2012, 111 (07)
  • [23] Structures and magnetic properties of Sm2Fe17N3 bulk magnets prepared by spark plasma sintering with dynamic compression
    Saito, Tetsuji
    Nishio-Hamane, Daisuke
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2024, 605
  • [24] Angular dependence of coercivity in Sm-Fe-N permanent magnets
    Pawlik, P
    Wyslocki, JJ
    Kaszuwara, W
    Leonowicz, M
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2002, 242 : 1344 - 1346
  • [25] Spark plasma sintering bulk Sm2Fe17Nxmagnets
    Yue, Ming
    Zhang, Dongtao
    Ji, Yongcheng
    Zhang, Jiuxing
    Journal of Rare Earths, 2004, 22 (SUPPL. 1) : 73 - 75
  • [26] METASTABLE SM-FE-N MAGNETS PREPARED BY MECHANICAL ALLOYING
    LIU, W
    WANG, Q
    SUN, XK
    ZHAO, XG
    ZHAO, T
    ZHANG, ZD
    CHUANG, YC
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1994, 131 (03) : 413 - 416
  • [27] Fabrication of High-performance Sm-Fe-N isotropic bulk magnets by a combination of High-pressure compaction and current sintering
    Takagi, Kenta
    Nakayama, Hiroyuki
    Ozaki, Kimihiro
    Kobayashi, Keizo
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2012, 324 (07) : 1337 - 1341
  • [28] Mechanically alloyed Sm-Fe-N magnets with addition of Ga
    Vasilyeva, E
    Januszewski, D
    Leonowicz, M
    IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (05) : 3853 - 3855
  • [29] Magnetic properties of isotropic Sm-Fe-N magnets produced by compression shearing method
    Saito, Tetsuji
    Kitazima, Hiroshi
    JOURNAL OF APPLIED PHYSICS, 2012, 111 (07)
  • [30] Magnetic properties of Sm5Fe17-based magnets produced by spark plasma sintering method
    Saito, Tetsuji
    Furutani, Tomokazu
    IUMRS-ICA 2008 SYMPOSIUM AA. RARE-EARTH RELATED MATERIAL PROCESSING AND FUNCTIONS, 2008, 1
12345