Production of Sm-Fe-N bulk magnets by spark plasma sintering method

被引：25
|
作者：
Saito, Tetsuji [1 ]
机构：
[1] Chiba Inst Technol, Dept Mech Sci & Engn, Narashino, Chiba 2750016, Japan
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2014年 / 369卷
关键词：
Rare-earth permanent magnets; Spark plasma sintering; Magnetic properties; POWDERS; COMPRESSION; COMPACTION;
D O I：
10.1016/j.jmmm.2014.06.034
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Th2Zn17-type and TbCu7-type Sm-Fe-N powder were consolidated into bulk magnets by the spark plasma sintering (SPS) method. It was found that the coarse TbCu7-type Sm-Fe-N powder possessed greater stability during sintering than the One Th2Zn17-type Sm-Fe-N powder. Although the TbCu7-type magnets produced at temperatures exceeding 773 K showed a low coercivity comparable to that of the Th2Zn17-type magnets, they exhibited a higher coercivity than the Th2Zn17-type magnets when produced at 773 K or lower. The TbCu7-type magnet produced at 773 K exhibited a high remanence of 96.4 Am-2/kg with a high coercivity of 0.72 MA/m. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：184 / 188
页数：5
相关论文
共 50 条
  • [1] Production of Sm-Fe-N bulk magnets by the spark plasma sintering method with dynamic compression
    Saito, Tetsuji
    Kikuchi, Kotaro
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 673 : 195 - 198
  • [2] Structures and magnetic properties of Sm-Fe-N bulk magnets produced by the spark plasma sintering method
    Tetsuji Saito
    Journal of Materials Research, 2007, 22 : 3130 - 3136
  • [3] Structures and magnetic properties of Sm-Fe-N bulk magnets produced by the spark plasma sintering method
    Saito, Tetsuji
    JOURNAL OF MATERIALS RESEARCH, 2007, 22 (11) : 3130 - 3136
  • [4] Magnetic properties of anisotropic Sm-Fe-N bulk magnets produced by spark plasma sintering method
    Saito, Tetsuji
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2008, 320 (13) : 1893 - 1897
  • [5] Sm-Fe-N bulk magnets produced by compression shearing method
    Saito, T
    Fukui, M
    Takeishi, H
    SCRIPTA MATERIALIA, 2005, 53 (10) : 1117 - 1121
  • [6] Magnetic properties of Sm-Fe-N anisotropic magnets produced by magnetic-field-assisted spark plasma sintering
    Saito, Testuji
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2010, 167 (02): : 75 - 79
  • [7] Enhanced coercivity of spark plasma sintered Zn-bonded Sm-Fe-N magnets
    Prabhu, D.
    Sepehri-Amin, H.
    Mendis, C. L.
    Ohkubo, T.
    Hono, K.
    Sugimoto, S.
    SCRIPTA MATERIALIA, 2012, 67 (02) : 153 - 156
  • [8] Magnetic properties of Sm-Fe-N bulk magnets produced by compression shearing method
    Saito, Tetsuji
    Sato, Hisanobu
    Fukui, Masato
    Takeishi, Hiroyuku
    Journal of Applied Physics, 2006, 99 (08):
  • [9] Magnetic properties of Sm-Fe-N bulk magnets produced by compression shearing method
    Saito, T
    Sato, H
    Fukui, M
    Takeishi, H
    JOURNAL OF APPLIED PHYSICS, 2006, 99 (08)
  • [10] Magnetic properties of Sm-Fe-N bulk magnets produced from Cu-plated Sm-Fe-N powder
    Saito, Tetsuji
    Deguchi, Tomoe
    Yamamoto, Hitoshi
    AIP ADVANCES, 2017, 7 (05):
12345