Effect of austempering on microstructure and mechanical properties of a GCr18Mo steel

被引：10
|
作者：
Wen, Jiuba [1 ]
Li, Qian [1 ]
Long, Yongqiang [1 ]
机构：
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471003, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2006年 / 438卷 / SPEC. ISS.期
关键词：
GCr18Mo steel; B-L/M duplex structure; austempering;
D O I：
10.1016/j.msea.2006.02.199
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The microstructure and mechanical properties of a GCr 18Mo steel were investigated. The martensite/lower bainite (B-L/M) duplex structure with various B-L volume fractions (f(BL)) or that full of B-L were produced by austenitizing at 870 degrees C, quenching in nitrates at 230 degrees C and holding for different times. The steels with such structures exhibit higher strength-toughness than that of full martensite. When f(BL) is approximately 37.5% obtained by holding for about 60 min, the duplex-structured steel gives rise to the best combination of mechanical properties. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：251 / 253
页数：3
相关论文
共 50 条
  • [21] Effect of austempering heat treatment on the microstructure and mechanical properties of gray iron
    Wang, Zhen-Hua
    Yin, Zhi-Xin
    Liu, Zhi-Ke
    Yin, Bing-Sheng
    Zhuzao/Foundry, 2006, 55 (04): : 397 - 400
  • [22] Microstructures and Mechanical Properties of Austempering Cr-Mo (SCM 435) Alloy Steel
    Chen, Cheng-Yi
    Hung, Fei-Yi
    Lui, Truan-Sheng
    Chen, Li-Hui
    MATERIALS TRANSACTIONS, 2013, 54 (01) : 56 - 60
  • [23] Effect of Mo Content on the Microstructure and Mechanical Properties of Tic Steel Bonded Carbide
    Li, G. P.
    Chen, W.
    Sun, L. H.
    Sun, H. S.
    Luo, F. H.
    PROCEEDINGS OF THE 2ND ANNUAL INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL ENGINEERING (AME 2016), 2016, 85 : 401 - 408
  • [24] Grain Refinement During Directionally Solidifying GCr18Mo Steel at Low Pulling Speeds Under an Axial Static Magnetic Field
    Yuan Hou
    Zhen-Qiang Zhang
    Wei-Dong Xuan
    Jiang Wang
    Jian-Bo Yu
    Zhong-Ming Ren
    Acta Metallurgica Sinica (English Letters), 2018, 31 : 681 - 691
  • [25] Effect of pre-treatment and austempering on microstructure and mechanical properties of 55Si2MnMoV steel
    Liu, Chi
    Deng, Shaowei
    Chen, Linwang
    Wang, Yanhuan
    Tang, Daodong
    Zeng, Hongrui
    Guo, Qiyang
    Chen, Dazhi
    Zhang, Chengsong
    Cui, Guodong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 4833 - 4842
  • [26] Grain Refinement During Directionally Solidifying GCr18Mo Steel at Low Pulling Speeds Under an Axial Static Magnetic Field
    Hou, Yuan
    Zhang, Zhen-Qiang
    Xuan, Wei-Dong
    Wang, Jiang
    Yu, Jian-Bo
    Ren, Zhong-Ming
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2018, 31 (07) : 681 - 691
  • [27] GCr18Mo轧机轴承在某带钢轧厂的应用
    王国平
    机械工程师, 2015, (04) : 262 - 262
  • [28] GCr18Mo轴承钢复相组织对强韧性影响
    龙永强
    李谦
    文九巴
    热加工工艺, 2004, (12) : 4 - 6
  • [29] GCr18Mo钢贝氏体淬火组织与接触疲劳寿命
    叶健熠
    雷建中
    杨巧玲
    王世俊
    商锦海
    轴承, 2000, (07) : 17 - 19+41
  • [30] The effect of austempering on the microstructure and mechanical properties of PM Fe-0.8c steel aloyed with copper and nickel
    Gokmese, Hakan
    Saricicek, Nurullah
    Gural, Ahmet
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (09) : 844 - 852
12345