Effect of austempering on microstructure and mechanical properties of a GCr18Mo steel

被引：10
|
作者：
Wen, Jiuba [1 ]
Li, Qian [1 ]
Long, Yongqiang [1 ]
机构：
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471003, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2006年 / 438卷 / SPEC. ISS.期
关键词：
GCr18Mo steel; B-L/M duplex structure; austempering;
D O I：
10.1016/j.msea.2006.02.199
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The microstructure and mechanical properties of a GCr 18Mo steel were investigated. The martensite/lower bainite (B-L/M) duplex structure with various B-L volume fractions (f(BL)) or that full of B-L were produced by austenitizing at 870 degrees C, quenching in nitrates at 230 degrees C and holding for different times. The steels with such structures exhibit higher strength-toughness than that of full martensite. When f(BL) is approximately 37.5% obtained by holding for about 60 min, the duplex-structured steel gives rise to the best combination of mechanical properties. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：251 / 253
页数：3
相关论文
共 50 条
  • [1] Study on the modification of inclusions by Ca treatment in GCr18Mo bearing steel
    Hong-Yan Zheng
    Shu-Qiang Guo
    Meng-Ran Qiao
    Li-Bin Qin
    Xiu-Jing Zou
    Zhong-Ming Ren
    Advances in Manufacturing, 2019, 7 : 438 - 447
  • [2] Study on the modification of inclusions by Ca treatment in GCr18Mo bearing steel
    Zheng, Hong-Yan
    Guo, Shu-Qiang
    Qiao, Meng-Ran
    Qin, Li-Bin
    Zou, Xiu-Jing
    Ren, Zhong-Ming
    ADVANCES IN MANUFACTURING, 2019, 7 (04) : 438 - 447
  • [3] GCr18Mo钢退火工艺的改进
    李欣
    姜莉莉
    哈尔滨轴承, 2010, 31 (02) : 33 - 34+37
  • [4] GCr18Mo钢热处理工艺
    张增岐
    常保良
    轴承, 1991, (02) : 14 - 17+60
  • [5] Effect of austempering treatment on microstructure and mechanical properties of high-Si steel
    D. Mandal
    M. Ghosh
    J. Pal
    P. K. De
    S. Ghosh Chowdhury
    S. K. Das
    G. Das
    Sukomal Ghosh
    Journal of Materials Science, 2009, 44 : 1069 - 1075
  • [6] Effect of austempering treatment on microstructure and mechanical properties of high-Si steel
    Mandal, D.
    Ghosh, M.
    Pal, J.
    De, P. K.
    Chowdhury, S. Ghosh
    Das, S. K.
    Das, G.
    Ghosh, Sukomal
    JOURNAL OF MATERIALS SCIENCE, 2009, 44 (04) : 1069 - 1075
  • [7] GCr18Mo钢等温淬火工艺与性能试验
    孙茂林
    林太军
    姚艳书
    轴承, 2001, (08) : 28 - 30+47
  • [8] 新型高淬透性轴承钢GCr18Mo
    刘永长，谢业万
    特殊钢, 1995, (04) : 29 - 33
  • [9] Effect of Intercritical Annealing and Austempering on the Microstructure and Mechanical Properties of a High Silicon Manganese Steel
    Franceschi, Mattia
    Pezzato, Luca
    Gennari, Claudio
    Fabrizi, Alberto
    Polyakova, Marina
    Konstantinov, Dmitry
    Brunelli, Katya
    Dabala, Manuele
    METALS, 2020, 10 (11) : 1 - 19
  • [10] 轴承钢GCr18Mo锻材试制分析
    崔丽
    李彦军
    师永成
    一重技术, 2001, (01) : 62 - 63
12345