Mechanical behavior and crack propagation of ABS 3D printed specimens

被引：16

作者：

Majid, Fatima ^{[1
]}

Zekeriti, Najat ^{[1
]}

Rhanim, Rajaa ^{[2
]}

Lahlou, Mohammed ^{[3
]}

Rhanim, Hassan ^{[1
]}

Mrani, Brahim ^{[1
]}

机构：

[1] Univ Chouaib Doukkali, Lab Nucl Atom Mol Mech & Energet Phys, FSJ, El Jadida, Morocco

[2] Univ Moulay Smail, Lab Study Adv Mat & Applicat, Meknes, Morocco

[3] Univ Chouaib Doukkali, ENSAJ, LabSIPE, El Jadida, Morocco

来源：

1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1 | 2020年 / 28卷

关键词：

3D printer; tensile test; ABS; SENT; Stress intensity factor;

D O I：

10.1016/j.prostr.2020.10.147

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The present paper analyzes manufacturing density effect on the mechanical properties of three-dimensional (3D) printed ABS specimens. Indeed, the optimum density of the printed specimens is investigated to reach the extruded specimens' characteristics. Then, the mechanical properties such as the tensile strength, the Young's modulus, the ultimate tensile and yield strength, the ductility and fracture toughness are identified and compared. Furthermore, we study crosshead speed effect on printed samples with an infill rate of 100% towards crack propagation. Subsequently, the stress intensity factor is determined. The results indicate a considerable effect of the density and the filling rate on tensile properties and on the rupture propagation. (C) 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo

引用

页码：1719 / 1726

页数：8

共 50 条

[41] Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation
Rankouhi B.
Javadpour S.
Delfanian F.
Letcher T.
Journal of Failure Analysis and Prevention, 2016, 16 (3) : 467 - 481
[42] Anisotropic mechanical behavior of 3D printed liquid crystal elastomer
Wang, Zijun
Boechler, Nicholas
Cai, Shengqiang
ADDITIVE MANUFACTURING, 2022, 52
[43] Mechanical behavior of 3D printed micro lattice material structure
Raja, R.
Gabriel, Jebas D.
Jannet, Sabitha
Niyas, A. Mohammed
Vijay, S. J.
Rai, Rajakumar S.
Thankachan, Titus
MATERIALS TODAY-PROCEEDINGS, 2022, 52 : 944 - 949
[44] 3D Printed Tubular Scaffolds with Massively Tailorable Mechanical Behavior
Pickering, Edmund
Paxton, Naomi C.
Bo, Arixin
O'Connell, Bridget
King, Mitchell
Woodruff, Maria A.
ADVANCED ENGINEERING MATERIALS, 2022, 24 (11)
[45] Effects of Microstructural Arrangement on the Mechanical Behavior of 3D Printed Polyamide
Hedjazi, Lotfi
Belhabib, Sofiane
Stephant, Nicolas
Durand, Sylvie
Guessasma, Sofiane
SYMMETRY-BASEL, 2023, 15 (12):
[46] 3D constraint effect on 3D fatigue crack propagation
Shen, HJ
Guo, WL
INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (06) : 617 - 623
[47] Analysis of the resistance to crack propagation in SENT test specimens printed in ABS using parallel or crossed filaments between layers
Aourik, O.
Chouaf, A.
Othmani, M.
FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2023, 17 (63): : 246 - 256
[48] 3D Analyses of crack propagation in torsion
Shiozawa, D.
Serrano-Munoz, I.
Dancette, S.
Verdu, C.
Lachambre, J.
Buffiere, J. -Y.
FRATTURA ED INTEGRITA STRUTTURALE, 2015, 33 (33): : 56 - 60
[49] Calculation of T - stress on 3D specimens with crack
Novotny, Ladislav
MODELLING OF MECHANICAL AND MECHATRONICS SYSTEMS, 2012, 48 : 489 - 494
[50] Effect of infill pattern on the mechanical properties of PLA and ABS specimens prepared by FDM 3D printing
Patel, Shishir
Gupta, Sneha
Saket, Harshit
Bakna, Kamesh
Patel, Shiv Singh
Kumar, Surender
Ramakoteswara Rao, Veeravalli
Mandava, Ravi Kumar
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,

← 1 2 3 4 5 →