Surface modification of diamond-like carbon coatings to control over run-in processes in friction pair
被引:2
|
作者:
Grigoriev, S. N.
论文数: 0引用数: 0
h-index: 0
机构:
Moscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, RussiaMoscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, Russia
Grigoriev, S. N.
[1
]
Fominski, V. Yu
论文数: 0引用数: 0
h-index: 0
机构:
Natl Res Nucl Univ, MEPhI Moscow Engn Phys Inst, Kashirskoe Sh 31, Moscow 115409, RussiaMoscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, Russia
Fominski, V. Yu
[2
]
Volosova, M. A.
论文数: 0引用数: 0
h-index: 0
机构:
Moscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, RussiaMoscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, Russia
Volosova, M. A.
[1
]
Romanov, R. I.
论文数: 0引用数: 0
h-index: 0
机构:
Natl Res Nucl Univ, MEPhI Moscow Engn Phys Inst, Kashirskoe Sh 31, Moscow 115409, RussiaMoscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, Russia
Romanov, R. I.
[2
]
Demin, M. V.
论文数: 0引用数: 0
h-index: 0
机构:
Natl Res Nucl Univ, MEPhI Moscow Engn Phys Inst, Kashirskoe Sh 31, Moscow 115409, RussiaMoscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, Russia
Demin, M. V.
[2
]
机构:
[1] Moscow State Univ Technol STANKIN, Vadkovskii Per 1, Moscow 127994, Russia
[2] Natl Res Nucl Univ, MEPhI Moscow Engn Phys Inst, Kashirskoe Sh 31, Moscow 115409, Russia
The effect of the nanostructure and chemical composition of thin Mo-Se-C films on the run-in of the diamond-like carbon coating (a-C) and the steel counterbody during ball-on-disk sliding test is studied. At the final stage of the deposition of the a-C coating on the steel substrate, a flow of atoms from the MoSe2 target was added to the flow of atoms being deposited. The influence of the air humidity on the selection of optimum structure and chemical composition of the film, which provide a fairly low (< 0.07) coefficient of friction during the entire period of the run-in stage, is considered. In order to explain the effect of the modifying films, analysis of the specific features of the friction-induced changes in the composition of the films during wear debris formation has been carried out using Raman spectroscopy.