384 Channel Modular Ultrasonic CMUT Probe for Rapid Prototyping

被引：0

作者：

Pedersen, Kasper F. ^{[1
]}

Engholm, Mathias ^{[1
]}

Havreland, Andreas S. ^{[1
]}

Moesner, Lars N. ^{[3
]}

Beers, Christopher ^{[2
]}

Tomov, Borislav G. ^{[1
]}

Jensen, Jorgen A. ^{[1
]}

Thomsen, Erik, V ^{[1
]}

机构：

[1] Tech Univ Denmark, Dept Hlth Technol, Lyngby, Denmark

[2] BK Med, State Coll, PA USA

[3] BK Med, Herlev, Denmark

来源：

PROCEEDINGS OF THE 2020 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS) | 2020年

关键词：

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents the design and fabrication of a novel 384 channel modular ultrasonic probe for row-column addressed capacitive micromachined ultrasound transducers. The nose-piece and front-electronics can be freely interchanged in situ, allowing different combinations of transducer arrays and front-end architectures to be characterized and compared, without fabricating an entire probe for each device under test. The probe is designed to facilitate rapid prototyping and full acoustic testing of 192+192 RCA arrays at low cost, and within days after the arrays have been fabricated, but also supports conventional matrix arrays and linear arrays with up to 384 channels with only minor changes.

引用

页数：3

共 50 条

[1] On rapid prototyping of assembly systems - a modular approach
Qian, Zhiqin
Zhang, Tan
Cai, Mengya
Lin, Wenjun
Zhang, Wenjun
[J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2018, 56 (03): : 220 - 233
[2] Mechanical analysis of ultrasonic bonding for rapid prototyping
Gao, Y
Doumanidis, C
[J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2002, 124 (02): : 426 - 434
[3] Modular Haptic Feedback for Rapid Prototyping of Tactile Displays
Sanchez Cruz, Ramon E.
Coffey, Mela C.
Sawaya, Ambert Yang
Khurshid, Rebecca P.
[J]. 2021 IEEE WORLD HAPTICS CONFERENCE (WHC), 2021, : 703 - 708
[4] Pediatric Dispersible Tablets: a Modular Approach for Rapid Prototyping
Buck, Jonas
Huwyler, Jorg
Kuhl, Peter
Dischinger, Angela
[J]. PHARMACEUTICAL RESEARCH, 2016, 33 (08) : 2043 - 2055
[5] Pediatric Dispersible Tablets: a Modular Approach for Rapid Prototyping
Jonas Buck
Jörg Huwyler
Peter Kühl
Angela Dischinger
[J]. Pharmaceutical Research, 2016, 33 : 2043 - 2055
[6] Rapid Prototyping technologies for ultrasonic beam focussing in NDE
Billson, D. R.
Purssell, C. P.
Leigh, S. J.
Hutchins, D. A.
[J]. 2011 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2011, : 2472 - 2474
[7] MODULAR ELASTIC LATTICE PLATFORM FOR RAPID PROTOTYPING,OF TENSEGRITY ROBOTS
Chen, Lee-Huang
Daly, Mallory C.
Sabelhaus, Andrew P.
van Vuuren, Lara A. Janse
Garnier, Hunter J.
Verdugo, Mariana I.
Tang, Ellande
Spangenberg, Carielle U.
Ghahani, Faraz
Agogino, Alice M.
Agogino, Adrian K.
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2017, VOL 5B, 2017,
[8] Rapid prototyping of modular/hypercube trellis decoders for communication systems
Pouliot, LE
Fortier, P
[J]. 1997 CANADIAN CONFERENCE ON ELECTRICAL AND COMPUTER ENGINEERING, CONFERENCE PROCEEDINGS, VOLS I AND II: ENGINEERING INNOVATION: VOYAGE OF DISCOVERY, 1997, : 83 - 86
[9] DESIGN OF MODULAR DEVICE FOR RAPID-PROTOTYPING AND ITS APPLICATIONS
Durkac, M.
Marecek, J.
[J]. MENDELNET 2011, 2011, : 840 - 845
[10] A Handheld Imaging Probe for Acoustic Angiography With an Ultrawideband Capacitive Micromachined Ultrasonic Transducer (CMUT) Array
Sanders, Jean L.
Biliroglu, Ali Onder
Newsome, Isabel G.
Adelegan, Oluwafemi J.
Yamaner, Feysel Yalcin
Dayton, Paul A.
Oralkan, Omer
[J]. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2022, 69 (07) : 2318 - 2330

← 1 2 3 4 5 →