Effect of surface texturing on friction coefficient between aluminum and alloy tool steel under lubricated sliding contact

被引：0
|
作者：
Nuraliza, N. [1 ]
Syahrullail, S. [1 ]
机构：
[1] Univ Teknol Malaysia, Fac Mech Engn, Utm Skudai 81310, Johor, Malaysia
来源：
PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015 | 2015年
关键词：
Surface texturing; tribology; sliding;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Recently, it has been identified that controlled porosity on a tribological surface can contribute to friction reduction at sliding contact interfaces. The present paper verifies the effect of micro-pit on the frictional properties of aluminum against SKD 11(alloy tool steel).Pin-on-disk tests modeling the contact between block surface and planar faces were carried out for a variety of sliding speed. It was found that the tribological characteristics depended greatly on the embedded micro-pit or without micro-pit, whilst the micro-pits shape did not significantly affect the friction coefficient regardless of rounded shape.
引用
收藏
页码：17 / 18
页数：2
相关论文
共 50 条
  • [41] Modify the friction between steel ball and PDMS disk under water lubrication by surface texturing
    Jinfeng Li
    Fei Zhou
    Xiaolei Wang
    [J]. Meccanica, 2011, 46 : 499 - 507
  • [42] Asymmetric surface texturing for directional friction control under dry sliding condition
    Tewelde, Fitsum B.
    Zhou, Tianfeng
    Zhou, Jia
    Guo, Weijia
    Zhao, Bin
    Ge, Xiangyu
    Wang, Wenzhong
    Wang, Xiaoli
    Wang, Xibin
    [J]. TRIBOLOGY INTERNATIONAL, 2023, 181
  • [43] Friction and wear characteristics of ZDDP in the sliding of steel against aluminum alloy
    Wan, Y
    Cao, LL
    Xue, QJ
    [J]. TRIBOLOGY INTERNATIONAL, 1997, 30 (10) : 767 - 772
  • [44] TEAMING MEASUREMENTS OF THE COEFFICIENT OF FRICTION AND OF CONTACT RESISTANCE AS A TOOL FOR THE INVESTIGATION OF SLIDING INTERFACES
    BREDELL, LJ
    JOHNSON, LB
    KUHLMANNWILSDORF, D
    [J]. WEAR, 1987, 120 (02) : 161 - 173
  • [45] Friction Coefficient and Wear Rate of Copper and Aluminum Sliding against Mild Steel
    Nuruzzaman, Dewan Muhammad
    Chowdhury, Mohammad Asaduzzaman
    [J]. INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2013, 4 (01): : 29 - 40
  • [46] Effect of surface texturing of UHMWPE on the coefficient of friction under arthrokinematic and loading conditions corresponding to the walking cycle
    Montes-Seguedo, J. L.
    Dominguez-Lopez, I.
    Barceinas-Sanchez, J. D. O.
    [J]. MATERIALS LETTERS, 2021, 284
  • [47] Synergistic effect of surface texturing and coating on the friction between piston ring and cylinder liner contact
    Mishra, Parul
    Penchaliah, Ramkumar
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2021, 235 (07) : 1298 - 1311
  • [48] Influence of surface laser texturing on friction and wear of ptfe during sliding against steel
    Kowalewski, Piotr
    Galek, Tomasz
    [J]. Tribologia, 2021, 281 (05): : 27 - 31
  • [49] Friction reduction by texturing of DLC coatings sliding against steel under oil lubrication
    Koskinen, Jari
    Tapper, Unto
    Andersson, Peter
    Varjus, Simo
    Kolehmainen, Jukka
    Tervakangas, Sanna
    Buss, Wolfgang
    [J]. SURFACE & COATINGS TECHNOLOGY, 2010, 204 (23): : 3794 - 3797
  • [50] Effect of L/d on friction coefficient of water lubricated plastic alloy bearings
    Yu, Jiangbo
    Wang, Jiaxu
    Peng, Jinmin
    [J]. Run Hua Yu Mi Feng/Lubrication Engineering, 2002, (03):
12345