Fatigue delamination behaviour of unidirectional carbon fibre/epoxy laminates reinforced by Z-Fiber® pinning

被引：62
|
作者：
Cartie, Denis D. R. [1 ]
Laffaille, Jean-Martin [1 ]
Partridge, Ivana K. [1 ]
Brunner, Andreas J. [2 ]
机构：
[1] Cranfield Univ, Sch Appl Sci, Composites Ctr, Cranfield MK43 0AL, Beds, England
[2] Swiss Fed Labs Mat Testing & Res, CH-8600 Dubendorf, Switzerland
来源：
ENGINEERING FRACTURE MECHANICS | 2009年 / 76卷 / 18期
基金：
英国工程与自然科学研究理事会;
关键词：
Composites; Delamination; Fatigue crack growth; Z-Fiber (R) pinning; LOW-VELOCITY IMPACT; FAILURE MECHANISMS; CYCLIC TENSION; JOINTS; PERFORMANCE; COMPOSITES; SIMULATION; DAMAGE;
D O I：
10.1016/j.engfracmech.2009.07.018
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Z-Pin reinforced carbon-fibre epoxy laminates were tested under Mode I and Mode II conditions, both quasi-statically and in fatigue. Test procedures were adapted from existing standard or pre-standard tests. Samples containing 2% and 4% areal densities of carbon-fibre Z-pins (0.28 mm diameter) were compared with unpinned laminates. Quasi-static tests under displacement control yielded a dramatic increase of the apparent delamination resistance. Specimens with 2% pin density failed in Mode I at loads 170 N, equivalent to an apparent G(IC) of 2 kJ/m(2). Fatigue testing under load control showed that the presence of the through-thickness reinforcement slowed down fatigue delamination propagation. (C) 2009 Published by Elsevier Ltd.
引用
收藏
页码：2834 / 2845
页数：12
相关论文
共 50 条
  • [41] An experimental and numerical study on the crush behaviour of hybrid unidirectional/woven carbon-fibre reinforced composite laminates
    Liu, Haibao
    Falzon, Brian G.
    Dear, John P.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 164
  • [42] Delamination analysis of carbon fibre reinforced laminates: Evaluation of a special step drill
    Marques, Antonio T.
    Durao, Luis M.
    Magalhaes, Antonio G.
    Silva, Joao Francisco
    Tavares, Joao Manuel R. S.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (14) : 2376 - 2382
  • [43] Effect of Thermal Ageing on the Impact and Flexural Damage Behaviour of Carbon Fibre-Reinforced Epoxy Laminates
    Garcia-Moreno, Irene
    Angel Caminero, Miguel
    Patricia Rodriguez, Gloria
    Jose Lopez-Cela, Juan
    POLYMERS, 2019, 11 (01)
  • [44] Time-Dependent Behaviour of Carbon Fibre Reinforced Laminates
    Dumansky, Alexander
    Tairova, Lyudmila
    ACMTAA 2012: PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND TECHNOLOGIES FOR AEROSPACE APPLICATIONS, 2012, : 75 - 79
  • [45] R-curve behaviour of the mixed-mode I/II delamination in carbon/epoxy laminates with unidirectional and multidirectional interfaces
    Gong, Yu
    Zhang, Bing
    Zhao, Libin
    Zhang, Jianyu
    Hu, Ning
    Zhang, Chuanzeng
    COMPOSITE STRUCTURES, 2019, 223
  • [46] Seawater Effect on Fatigue Behaviour of Notched Carbon/Epoxy Laminates
    Branco, Ricardo
    Reis, Paulo N. B.
    Neto, Maria A.
    Costa, Jose D.
    Amaro, Ana M.
    APPLIED SCIENCES-BASEL, 2021, 11 (24):
  • [47] FATIGUE DELAMINATION OF A CARBON FABRIC-REINFORCED EPOXY COMPOSITE WITH CARBON NANOTUBES
    Kadlec, Martin
    Sedek, Jakub
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [48] Experimental and numerical investigation of the effect of gaps on fatigue behavior of unidirectional carbon/epoxy automated fiber placement laminates
    Elsherbini, Yasser Mahmoud
    Hoa, Suong V.
    JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (06) : 759 - 772
  • [49] Compression properties of z-pinned carbon-fibre/epoxy laminates reinforced with circumferentially notched z-pins
    Knopp, Andre
    Scharr, Gerhard
    COMPOSITES SCIENCE AND TECHNOLOGY, 2021, 201
  • [50] Graphene/epoxy interleaves for delamination toughening and monitoring of crack damage in carbon fibre/epoxy composite laminates
    Du, Xusheng
    Zhou, Helezi
    Sun, Weifu
    Liu, Hong-Yuan
    Zhou, Guangnan
    Zhou, Huamin
    Mai, Yiu-Wing
    COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 140 : 123 - 133
12345