Study on Magnetic Field Distribution in the Container of Magnetic Barrel Finishing Machine

被引：0
|
作者：
Zhang, Y. [1 ]
Yoshioka, M. [2 ]
Hira, S. [2 ]
机构：
[1] Univ Yamanashi, Grad Sch Engn, Yamanashi, Japan
[2] Univ Yamanashi, Fac Engn, Yamanashi, Japan
来源：
ADVANCES IN ABRASIVE TECHNOLOGY XII | 2009年 / 76-78卷
关键词：
magnetic barrel finishing; media; magnet block; magnet disk; magnetic field distribution; magnetic field; polishing; polishing ability;
D O I：
10.4028/www.scientific.net/AMR.76-78.294
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The distribution of magnetic field in the container is important for the polishing ability of a permanent magnet-type magnetic barrel finishing machine. Therefore, in this study, the magnetic field distribution was measured with different magnets arrangement. It is found that the polarity and strength of magnets on a magnet block greatly affect the distribution of magnetic field. Polishing experiments were done to investigate the polishing ability. The relationship between the magnetic field distribution and the polishing ability was discussed. As a result, it was concluded that strong magnetic field led to superior polishing ability.
引用
收藏
页码：294 / +
页数：2
相关论文
共 50 条
  • [41] Magnetic Field of a Machine with Anisotropic Rotor Magnetic Conductance
    Gelver F.A.
    Samoseyko V.F.
    [J]. Russian Electrical Engineering, 2019, 90 (6) : 444 - 449
  • [42] Internal Magnetic Abrasive Particles Surface Finishing Based on Permanent Magnetic Field
    Chen, H. L.
    Yang, S. C.
    Wang, J. M.
    Li, W. H.
    Xiong, G. Y.
    [J]. SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING, 2008, 53-54 : 65 - +
  • [43] Analytical Model for the Magnetic Field Distribution in a Flux Modulation Superconducting Machine
    Colle, Alexandre
    Lubin, Thierry
    Ayat, Sabrina
    Gosselin, Olivier
    Leveque, Jean
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2019, 55 (12)
  • [44] A magnetic shear thickening media in magnetic field-assisted surface finishing
    Fan, Zenghua
    Tian, Yebing
    Zhou, Qiang
    Shi, Chen
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2020, 234 (6-7) : 1069 - 1072
  • [45] Investigation of the application of a magnetic abrasive finishing process using an alternating magnetic field for finishing micro-grooves
    Xie, Huijun
    Zou, Yanhua
    [J]. NANOTECHNOLOGY AND PRECISION ENGINEERING, 2021, 4 (03)
  • [46] Investigation of the application of a magnetic abrasive finishing process using an alternating magnetic field for finishing micro-grooves
    Huijun Xie
    Yanhua Zou
    [J]. Nanotechnology and Precision Engineering, 2021, 4 (03) : 16 - 23
  • [47] Analytical Investigation of the Magnetic-Field Distribution in an Axial-Flux Magnetic-Geared Machine
    Zhang, Xinhua
    Song, Zhiyi
    Huang, Jian
    Wang, Guan
    Wang, Tianyi
    [J]. PROCEEDINGS OF THE 2019 14TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2019), 2019, : 661 - 666
  • [48] Study on ultra-precision magnetic abrasive finishing process using low frequency alternating magnetic field
    Wu, Jinzhong
    Zou, Yanhua
    Sugiyama, Hitoshi
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2015, 386 : 50 - 59
  • [49] Study on the magnetic abrasive finishing process using alternating magnetic field—discussion on the influence of current waveform variation
    Huijun Xie
    Yanhua Zou
    [J]. The International Journal of Advanced Manufacturing Technology, 2021, 114 : 2471 - 2483
  • [50] Experimental Study on Pulsed Electromagnetic Field Assisted Planar Magnetic Abrasive Finishing
    Yang, Huan
    Chen, Song
    Zhang, Lei
    Xu, Jin-Wen
    Chen, Yan
    [J]. Surface Technology, 2022, 51 (02): : 313 - 321
12345