Study on Magnetic Field Distribution in the Container of Magnetic Barrel Finishing Machine

被引：0
|
作者：
Zhang, Y. [1 ]
Yoshioka, M. [2 ]
Hira, S. [2 ]
机构：
[1] Univ Yamanashi, Grad Sch Engn, Yamanashi, Japan
[2] Univ Yamanashi, Fac Engn, Yamanashi, Japan
来源：
ADVANCES IN ABRASIVE TECHNOLOGY XII | 2009年 / 76-78卷
关键词：
magnetic barrel finishing; media; magnet block; magnet disk; magnetic field distribution; magnetic field; polishing; polishing ability;
D O I：
10.4028/www.scientific.net/AMR.76-78.294
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The distribution of magnetic field in the container is important for the polishing ability of a permanent magnet-type magnetic barrel finishing machine. Therefore, in this study, the magnetic field distribution was measured with different magnets arrangement. It is found that the polarity and strength of magnets on a magnet block greatly affect the distribution of magnetic field. Polishing experiments were done to investigate the polishing ability. The relationship between the magnetic field distribution and the polishing ability was discussed. As a result, it was concluded that strong magnetic field led to superior polishing ability.
引用
收藏
页码：294 / +
页数：2
相关论文
共 50 条
  • [1] Magnetic field characteristics of the flat type electro-magnetic barrel finishing machine
    Sugiura, O
    [J]. ADVANCES IN ABRASIVE TECHNOLOGY VI, 2004, 257-258 : 515 - 520
  • [2] Application of Alternating Rotating Magnetic Field to Electromagnetic Barrel Finishing
    Liu, Z. Q.
    Chen, Y.
    Teng, J.
    [J]. HIGH SPEED MACHINING V, 2012, 723 : 466 - 470
  • [3] Study of the magnetic tool behavior and its relationship to the processing characteristics in a magnetic field assisted barrel finishing process
    Yamaguchi, H
    Shinmura, T
    Horiuchi, N
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXIX, 2001, 2001, : 197 - 204
  • [4] Study of Finishing of Wafers by Magnetic Field-Assisted Finishing
    Yamaguchi, Hitomi
    Yumoto, Kazuki
    Shinmura, Takeo
    Okazaki, Takahiko
    [J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2009, 3 (01): : 35 - 46
  • [5] Motion of magnetic barrel media in rotary magnetic field
    Yoshioka, M
    Hira, S
    Takeuchi, H
    [J]. ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, 1999, : 469 - 474
  • [6] Study on the effect of a magnetic field on an electrolytic finishing process
    Kim, JD
    Jin, DX
    Choi, MS
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1997, 37 (04): : 401 - 408
  • [7] Study on finishing characteristics of magnetic abrasive finishing process using low-frequency alternating magnetic field
    Wu, Jinzhong
    Zou, Yanhua
    Sugiyama, Hitoshi
    [J]. International Journal of Advanced Manufacturing Technology, 2016, 85 (1-4): : 585 - 594
  • [8] Study on finishing characteristics of magnetic abrasive finishing process using low-frequency alternating magnetic field
    Jinzhong Wu
    Yanhua Zou
    Hitoshi Sugiyama
    [J]. The International Journal of Advanced Manufacturing Technology, 2016, 85 : 585 - 594
  • [9] Study on finishing characteristics of magnetic abrasive finishing process using low-frequency alternating magnetic field
    Wu, Jinzhong
    Zou, Yanhua
    Sugiyama, Hitoshi
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (1-4): : 585 - 594
  • [10] Study on internal magnetic field assisted finishing process using a magnetic machining jig
    Zou, Y
    Shinmura, T
    [J]. ADVANCES IN ABRASIVE TECHNOLOGY VIII, 2005, 291-292 : 281 - 286
12345