In situ spatial strain monitoring of a single-lap joint using inkjet-printed carbon nanotube embedded thin films

被引：17
|
作者：
Zhao, Yingjun [1 ,2 ]
Schagerl, Martin [1 ,2 ]
Gschossmann, Sandra [2 ]
Kralovec, Christoph [1 ,2 ]
机构：
[1] Johannes Kepler Univ Linz, Christian Doppler Lab Struct Strength Control Lig, Alternberger Str 69, A-4040 Linz, Austria
[2] Johannes Kepler Univ Linz, Inst Struct Lightweight Design, Linz, Austria
来源：
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL | 2019年 / 18卷 / 5-6期
关键词：
Adhesive bonding; single-lap joint; carbon nanotubes; electrical impedance tomography; finite element analysis; ELECTRICAL-IMPEDANCE TOMOGRAPHY; ADHESIVELY BONDED JOINTS; DAMAGE;
D O I：
10.1177/1475921718805963
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Adhesive bonds are particularly favored by lightweight structures due to their weight efficiency and insulating property regarding contact corrosion. However, it is challenging to interrogate directly over the bonding area due to its sandwiched structure. In this study, an inkjet-printed carbon nanotube (CNT) strain distribution sensing film is embedded at the interface between an adherend and the adhesive in a single-lap joint configuration to monitor the spatial strain distribution over the bonding area. The conductivity distribution reconstructed by an algorithm of electrical impedance tomography (EIT) results in similar trend to the correlated conductivity distribution numerically calculated from a three-dimensional (3D) finite element model. Moreover, the EIT result of a defect-embedded testing specimen shows a different conductivity distribution compared to the healthy specimen, indicating the existence of the debonding region.
引用
收藏
页码：1479 / 1490
页数：12
相关论文
共 50 条
  • [31] A ultra-wideband thin microwave absorber using inkjet-printed frequency-selective surfaces combining carbon nanotubes and magnetic nanoparticles
    R. Jaiswar
    F. Mederos-Henry
    V. Dupont
    S. Hermans
    J. P. Raskin
    I. Huynen
    Applied Physics A, 2019, 125
  • [32] Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion
    Wang, Xiangjiang
    Wang, Yao
    Ji, Yundong
    Hu, Haixiao
    Cao, Dongfeng
    Zheng, Kaidong
    Liu, Hao
    Li, Shuxin
    MATERIALS, 2022, 15 (22)
  • [33] Reconstruction of fiber Bragg grating strain profile used to monitor the stiffness degradation of the adhesive layer in carbon fiber-reinforced plastic single-lap joint
    Song Chunsheng
    Zhang Jiaxiang
    Yang Mo
    Shang Erwei
    Zhang Jinguang
    ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (03):
  • [34] DISTRIBUTED STRAIN SENSING USING CARBON NANOTUBE THIN FILMS AND ELECTRICAL TIME-DOMAIN REFLECTOMETRY
    Lee, Bo Mi
    Loh, Kenneth J.
    di Scalea, Francesco Lanza
    PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2017, VOL 2, 2018,
  • [35] Passive wireless strain and pH sensing using carbon nanotube-gold nanocomposite thin films
    Loh, Kenneth J.
    Lynch, Jerome P.
    Kotov, Nicholas A.
    SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2007, PTS 1 AND 2, 2007, 6529
  • [36] Quasi-static and dynamic strain sensing using carbon nanotube/epoxy nanocomposite thin films
    Anand, Sandeep V.
    Mahapatra, D. Roy
    SMART MATERIALS AND STRUCTURES, 2009, 18 (04)
  • [37] Nano-particles doped carbon nanotube films for in-situ monitoring of temperature and strain during the processing of carbon fiber/epoxy composites
    Xing, Fei
    He, Zilan
    Wang, Shaokai
    Gu, Yizhuo
    Han, Jianchao
    Wang, Yanjie
    Zhang, Wei
    Li, Min
    POLYMER COMPOSITES, 2024,
  • [38] Point-of-care amperometric determination of L-dopa using an inkjet-printed carbon nanotube electrode modified with dandelion-like MnO2 microspheres
    Dalibor M. Stanković
    Milica Jović
    Miloš Ognjanović
    Andreas Lesch
    Martin Fabián
    Hubert H. Girault
    Bratislav Antić
    Microchimica Acta, 2019, 186
  • [39] Point-of-care amperometric determination of L-dopa using an inkjet-printed carbon nanotube electrode modified with dandelion-like MnO2 microspheres
    Stankovic, Dalibor M.
    Jovic, Milica
    Ognjanovic, Milos
    Lesch, Andreas
    Fabian, Martin
    Girault, Hubert H.
    Antic, Bratislav
    MICROCHIMICA ACTA, 2019, 186 (08)
  • [40] Flexible and Transparent Touch Sensor using Single-Wall Carbon Nanotube Thin-Films
    Choi, Eun-Suk
    Jeong, Min-Ho
    Choi, Kang Won
    Lim, Chaehyun
    Lee, Seung-Beck
    INEC: 2010 3RD INTERNATIONAL NANOELECTRONICS CONFERENCE, VOLS 1 AND 2, 2010, : 718 - +
12345