In situ spatial strain monitoring of a single-lap joint using inkjet-printed carbon nanotube embedded thin films

被引：17
|
作者：
Zhao, Yingjun [1 ,2 ]
Schagerl, Martin [1 ,2 ]
Gschossmann, Sandra [2 ]
Kralovec, Christoph [1 ,2 ]
机构：
[1] Johannes Kepler Univ Linz, Christian Doppler Lab Struct Strength Control Lig, Alternberger Str 69, A-4040 Linz, Austria
[2] Johannes Kepler Univ Linz, Inst Struct Lightweight Design, Linz, Austria
来源：
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL | 2019年 / 18卷 / 5-6期
关键词：
Adhesive bonding; single-lap joint; carbon nanotubes; electrical impedance tomography; finite element analysis; ELECTRICAL-IMPEDANCE TOMOGRAPHY; ADHESIVELY BONDED JOINTS; DAMAGE;
D O I：
10.1177/1475921718805963
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Adhesive bonds are particularly favored by lightweight structures due to their weight efficiency and insulating property regarding contact corrosion. However, it is challenging to interrogate directly over the bonding area due to its sandwiched structure. In this study, an inkjet-printed carbon nanotube (CNT) strain distribution sensing film is embedded at the interface between an adherend and the adhesive in a single-lap joint configuration to monitor the spatial strain distribution over the bonding area. The conductivity distribution reconstructed by an algorithm of electrical impedance tomography (EIT) results in similar trend to the correlated conductivity distribution numerically calculated from a three-dimensional (3D) finite element model. Moreover, the EIT result of a defect-embedded testing specimen shows a different conductivity distribution compared to the healthy specimen, indicating the existence of the debonding region.
引用
收藏
页码：1479 / 1490
页数：12
相关论文
共 50 条
  • [1] Characterization of the spatial elastoresistivity of inkjet-printed carbon nanotube thin films
    Zhao, Yingjun
    Gschossmann, Sandra
    Schagerl, Martin
    Gruener, Patrick
    Kralovec, Christoph
    SMART MATERIALS AND STRUCTURES, 2018, 27 (10)
  • [2] Characterization of the spatial elastoresistivity of inkjet-printed carbon nanotube thin films for strain-state sensing
    Gruener, Patrick
    Zhao, Yingjun
    Schagerl, Martin
    NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, AND CIVIL INFRASTRUCTURE 2017, 2017, 10169
  • [3] Strain Monitoring and Damage Detection of Single-Lap Joint with Embedded FBGs
    Murayama, H.
    Wada, D.
    Kageyama, K.
    Uzawa, K.
    Igawa, H.
    STRUCTURAL HEALTH MONITORING 2011: CONDITION-BASED MAINTENANCE AND INTELLIGENT STRUCTURES, VOL 2, 2013, : 1963 - 1968
  • [4] Strain monitoring of a single-lap joint with embedded fiber-optic distributed sensors
    Murayama, Hideaki
    Kageyama, Kazuro
    Uzawa, Kiyoshi
    Ohara, Kohei
    Igawa, Hirotaka
    STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2012, 11 (03): : 325 - 344
  • [5] Inkjet-Printed Multiwalled Carbon Nanotube Dispersion as Wireless Passive Strain Sensor
    Benchirouf, Abderrahmane
    Kanoun, Olfa
    SENSORS, 2024, 24 (05)
  • [6] Controlled Ohmic and nonlinear electrical transport in inkjet-printed single-wall carbon nanotube films
    Mustonen, Tero
    Maklin, Jani
    Kordas, Krisztian
    Halonen, Niina
    Toth, Geza
    Saukko, Sami
    Vahakangas, Jouko
    Jantunen, Heli
    Kar, Swastik
    Ajayan, Pulickel M.
    Vajtai, Robert
    Helisto, Panu
    Seppa, Heikki
    Moilanen, Hannu
    PHYSICAL REVIEW B, 2008, 77 (12):
  • [7] Fabrication of Inkjet-Printed Carbon Nanotube for Enhanced Mechanical and Strain-Sensing Performance
    Chen, Chun-Bing
    Kao, Hsuan-Ling
    Chang, Li-Chun
    Cho, Cheng-Lin
    Lin, Yi-Chen
    Huang, C-C
    Mo, C-C
    Chung, Wen-Hung
    Chiu, Hsien-Chin
    ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2021, 10 (12)
  • [8] Fine Patterning of Inkjet-Printed Single-Walled Carbon-Nanotube Thin-Film Transistors
    Nobusa, Yuki
    Takagi, Yuki
    Gocho, Shota
    Matsuzaki, Satoki
    Yanagi, Kazuhiro
    Takenobu, Taishi
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2012, 51 (06)
  • [9] Fine patterning of inkjet-printed single-walled carbon-nanotube thin-film transistors
    Nobusa, Yuki
    Takagi, Yuki
    Gocho, Shota
    Matsuzaki, Satoki
    Yanagi, Kazuhiro
    Takenobu, Taishi
    Japanese Journal of Applied Physics, 2012, 51 (6 PART 2)
  • [10] Thermodynamics and kinetics of polyoxyethylene alkyl ether evaporation from inkjet-printed carbon nanotube thin films by vacuum annealing
    Horike, Shohei
    Fukushima, Tatsuya
    Saito, Takeshi
    Koshiba, Yasuko
    Morimoto, Masahiro
    Misaki, Masahiro
    Ishida, Kenji
    FLEXIBLE AND PRINTED ELECTRONICS, 2018, 3 (02):
12345