The Drying Kinetics and Equilibrium Moisture Content of MDF Fibers

被引:13
|
作者
Fritzell, Emma [1 ]
Melander, Olof [2 ]
Rasmuson, Anders [1 ]
机构
[1] Chalmers Univ Technol, Dept Biol & Chem Engn, SE-41296 Gothenburg, Sweden
[2] Metso Paper Sundsvall AB, Appl Mech, Sundsvall, Sweden
关键词
Drying kinetics; Equilibrium moisture content; MDF fibers; WOOD FIBERS; CHIPS; FLOW;
D O I
10.1080/07373930902904566
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
An experimental device was constructed to study the drying kinetics of wood fibers under controlled conditions. The device consisted of a drying chamber in which a net basket filled with the fiber material was connected to a load cell. The drying medium was then forced through the basket at controlled levels of humidity and temperature. Experiments were performed with spruce fibers and the drying medium at varying temperature (50-170 degrees C) and relative humidity (1-86%). In general, the drying rate increased with increasing temperature and decreasing relative humidity. A constant drying rate period was observed in all cases. The critical moisture content was approximately 1.25. The characteristic drying curve has a slight downward concave shape. The equilibrium moisture contents obtained at ambient temperature agree well with data in the literature.
引用
收藏
页码:993 / 998
页数:6
相关论文
共 50 条
  • [41] Drying kinetics of building materials capillary moisture
    Karagiannis, Nikos
    Karoglou, Maria
    Bakolas, Asterios
    Krokida, Magdalini
    Moropoulou, Antonia
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 137 : 441 - 449
  • [42] Using LSTM and PSO techniques for predicting moisture content of poplar fibers by Impulse-cyclone Drying
    Chen, Feng
    Gao, Xun
    Xia, Xinghua
    Xu, Jing
    PLOS ONE, 2022, 17 (04):
  • [43] Moisture content target optimization in lumber drying
    Elustondo, Diego
    Oliveira, Luiz
    WOOD MATERIAL SCIENCE & ENGINEERING, 2011, 6 (04) : 190 - 195
  • [44] High temperature spouted bed paddy drying with varied downcomer air flows and moisture contents: Effects on drying kinetics, critical moisture content, and milling quality
    Madhiyanon, T
    Soponronnarit, S
    DRYING TECHNOLOGY, 2005, 23 (03) : 473 - 495
  • [45] Moisture content profiles in sapwood boards on drying
    Chen, G
    Keey, RB
    Walker, JCF
    DRYING '96, VOL A, 1996, : 679 - 687
  • [46] Drying of porous materials at low moisture content
    Plumb, OA
    Gu, LM
    Webb, SW
    DRYING TECHNOLOGY, 1999, 17 (10) : 1999 - 2011
  • [47] THE DRYING OF SOLIDS ..... PREDICTION OF CRITICAL MOISTURE CONTENT
    BROUGHTON, DB
    INDUSTRIAL AND ENGINEERING CHEMISTRY, 1945, 37 (12): : 1184 - 1185
  • [48] Detection of moisture content of particles during drying
    Chen M.
    Wang J.
    Yang Y.
    Liao Z.
    Huagong Xuebao/CIESC Journal, 2011, 62 (05): : 1269 - 1274
  • [49] The drying characteristic of biomass with high moisture content
    Wang, Xiaoqiang
    Feng, Shiye
    Su, Shuhua
    Zhang, Zhibo
    Lu, Qiang
    Dong, Changqing
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 401 - 405
  • [50] MOISTURE EQUILIBRIUM CHARTS FOR TRANSFORMER INSULATION DRYING PRACTICE
    OOMMEN, TV
    IEEE TRANSACTIONS ON POWER APPARATUS AND SYSTEMS, 1984, 103 (10): : 3063 - 3067