Lateral-torsional buckling behaviour of concrete-filled high-strength steel tubular flange beams under mid-span load

Lateral-torsional buckling (LTB) behaviour of concrete-filled high-strength steel tubular flange beams (HS-CFTFBs) is experimentally and numerically investigated. Six specimens are tested in simple support with a lateral unrestrained concentrated load in mid-span. Among them, two are failure controlled through flexural yielding (FY), whereas the remaining specimens are controlled through LTB. Finite-element (FE) models are then constructed and the comparison with the experimental results indicates that they could reliably and accurately evaluate failure modes, load-displacement relationship and ultimate capacities of HS-CFTFBs. These verified FE models are consequently used to investigate the effect of flange depth, concrete and steel with various span lengths. Results suggest that the ultimate moment capacity evidently decreases as the span length increased, particularly for the high-strength steel beams. The increasing flange depth remarkably improved the LTB strength but merely slightly increased the amount of steel. The infilled concrete could improve the resistance to flange distortion and thus increase the ultimate capacity. However, the strength of concrete exhibits a slight influence on ultimate capacity. Increasing fy could improve the LTB capacity when the span length is relatively small, but the improvements decrease with increasing span length. When the failure mode is elastic LTB, increased fy could substantially improve post-buckling stiffness and ductility (C) 2020 Elsevier Ltd. All rights reserved.