Study on Ru2Al5 prepared by mechanical alloying and subsequent heat treatment

被引：5
|
作者：
Bai, Fudong [1 ,2 ,3 ]
Chai, Zongxia [1 ,2 ,3 ]
Qi, Kai [1 ,2 ,3 ]
Li, Tingju [1 ,2 ,3 ]
Lu, Lianhai [4 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China
[2] Dalian Univ Technol, Lab Special Proc Raw Mat, Dalian 116085, Peoples R China
[3] Dalian Univ Technol, Key Lab Mat Modificat Laser Electron & Ion Beams, Minist Educ, Dalian 116085, Peoples R China
[4] Dalian Univ Technol, State Key Lab Fine Chem, Dalian 116085, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2009年 / 486卷 / 1-2期
基金：
中国国家自然科学基金;
关键词：
Intermetallics; Mechanical alloying; Phase transitions; RUTHENIUM PHASE-DIAGRAM; AL-RU SYSTEM; INTERMETALLIC COMPOUNDS; PART; TRANSFORMATIONS;
D O I：
10.1016/j.jallcom.2009.07.069
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The Ru2Al5 phase which cannot be easily obtained appeared accidentally in all Al-79:Ru-21 samples after mechanical alloying and subsequent heat treatment at 550 degrees C and disappeared at 700 degrees C for 2 h. The samples were investigated by powder X-ray diffraction, electron probe micro-analyzer and differential scanning calorimeter. The results showed that the phase transformation temperature of sample milled for 50 h was 100 degrees C lower than that milled for 20 h and the participation of ethanol as the process control agent in alloying increased the formation potential of Ru2Al5. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：801 / 804
页数：4
相关论文
共 50 条
  • [21] STRUCTURE AND THERMAL OXIDATION PROPERTIES OF RuAl AND Ru-Al-Ti ALLOYS PREPARED BY MECHANICAL ALLOYING
    Clisson, Marlene
    Gaudet, Julie
    Roue, Lionel
    Guay, Daniel
    TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2010, : 455 - 461
  • [22] Effect of al additions on the microstructure and properties of MoSi2-5Nb prepared by mechanical alloying
    Shan, AD
    Hashimoto, H
    Park, YH
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2003, : 713 - 716
  • [23] Formation of eutectic RuAl/Ru nanocomposite by mechanical alloying and subsequent annealing
    Liu, KW
    Mücklich, F
    Birringer, R
    JOURNAL OF MATERIALS RESEARCH, 2001, 16 (09) : 2459 - 2462
  • [24] Formation of eutectic RuAl/Ru nanocomposite by mechanical alloying and subsequent annealing
    K. W. Liu
    F. Mücklich
    R. Birringer
    Journal of Materials Research, 2001, 16 : 2459 - 2462
  • [25] Al-Al3Ti powders obtained by mechanical alloying and heat treatment
    Cuevas, FG
    Montes, JM
    Cintas, J
    Gallardo, JM
    REVISTA DE METALURGIA, 2005, : 83 - 88
  • [26] Structure of Al50Ti50-xFex alloys prepared by mechanical alloying and subsequent annealing
    Leonov, AV
    Fadeeva, VI
    Gladilina, OE
    Matyja, H
    JOURNAL OF ALLOYS AND COMPOUNDS, 1998, 281 (02) : 275 - 279
  • [27] Amorphization/crystallization behaviors of Ti50Al45Si5 multi-component powder treated by mechanical alloying and subsequent heat treatment
    Lee, Jeong-Han
    Park, Hyun-Kuk
    Jang, Jun-Ho
    Hong, Sung-Kil
    Oh, Ik-Hyun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 797 : 612 - 621
  • [28] Effect of mechanical alloying and heat treatment on the behavior of fe – 28% al – 5% cr powder with nanocrystalline structure
    W. M. Tang
    H. L. Liu
    Y. X. Wang
    G. O. Xu
    Z. X. Zheng
    Metal Science and Heat Treatment, 2012, 54 : 96 - 101
  • [29] Effect of mechanical alloying and heat treatment on the behavior of Fe - 28% Al - 5% Cr powder with nanocrystalline structure
    Tang, W. M.
    Liu, H. L.
    Wang, Y. X.
    Xu, G. O.
    Zheng, Z. X.
    METAL SCIENCE AND HEAT TREATMENT, 2012, 54 (1-2) : 96 - 101
  • [30] Effect of Heat Treatment on the Thermoelectric Properties of Bismuth–Antimony–Telluride Prepared by Mechanical Deformation and Mechanical Alloying
    Deuk-Hee Lee
    Jae-Uk Lee
    Sung-Jin Jung
    Seung-Hyub Baek
    Ju-Heon Kim
    Dong-Ik Kim
    Dow-Bin Hyun
    Jin-Sang Kim
    Journal of Electronic Materials, 2014, 43 : 2255 - 2261
12345