Study on Ru2Al5 prepared by mechanical alloying and subsequent heat treatment

被引：5
|
作者：
Bai, Fudong [1 ,2 ,3 ]
Chai, Zongxia [1 ,2 ,3 ]
Qi, Kai [1 ,2 ,3 ]
Li, Tingju [1 ,2 ,3 ]
Lu, Lianhai [4 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China
[2] Dalian Univ Technol, Lab Special Proc Raw Mat, Dalian 116085, Peoples R China
[3] Dalian Univ Technol, Key Lab Mat Modificat Laser Electron & Ion Beams, Minist Educ, Dalian 116085, Peoples R China
[4] Dalian Univ Technol, State Key Lab Fine Chem, Dalian 116085, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2009年 / 486卷 / 1-2期
基金：
中国国家自然科学基金;
关键词：
Intermetallics; Mechanical alloying; Phase transitions; RUTHENIUM PHASE-DIAGRAM; AL-RU SYSTEM; INTERMETALLIC COMPOUNDS; PART; TRANSFORMATIONS;
D O I：
10.1016/j.jallcom.2009.07.069
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The Ru2Al5 phase which cannot be easily obtained appeared accidentally in all Al-79:Ru-21 samples after mechanical alloying and subsequent heat treatment at 550 degrees C and disappeared at 700 degrees C for 2 h. The samples were investigated by powder X-ray diffraction, electron probe micro-analyzer and differential scanning calorimeter. The results showed that the phase transformation temperature of sample milled for 50 h was 100 degrees C lower than that milled for 20 h and the participation of ethanol as the process control agent in alloying increased the formation potential of Ru2Al5. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：801 / 804
页数：4
相关论文
共 50 条
  • [1] Stable structures and properties of Ru2Al5
    Luo, Jing
    Zhang, Meiguang
    Jia, Xiaofei
    Wei, Qun
    CHINESE PHYSICS B, 2025, 34 (01)
  • [2] Cu-Nb alloys prepared by mechanical alloying and subsequent heat treatment
    Botcharova, E
    Freudenberger, J
    Schultz, L
    JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 365 (1-2) : 157 - 163
  • [3] NITROGENATION OF SM2FE17 PREPARED BY MECHANICAL ALLOYING AND SUBSEQUENT HEAT-TREATMENT
    LUE, MQ
    MIAO, WF
    SONG, QH
    SUN, WS
    WANG, KY
    WEI, WD
    WANG, LB
    JOURNAL OF ALLOYS AND COMPOUNDS, 1992, 185 (01) : 73 - 80
  • [4] Synthesis of Al/TiC-Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment
    Mehrizi, M. Zarezadeh
    Beygi, R.
    Eisaabadi, Gh.
    CERAMICS INTERNATIONAL, 2016, 42 (07) : 8895 - 8899
  • [5] Synthesis of Mo5SiB2 based nanocomposites by mechanical alloying and subsequent heat treatment
    Abbasi, A. R.
    Shamanian, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (09): : 3295 - 3301
  • [6] Structural evolutions of the Fe-40Al-5Cr powders during mechanical alloying and subsequent heat treatment
    Liu, Haili
    Tang, Wenming
    Wang, Yuexia
    Liu, Chao
    Xu, Guangqing
    Zheng, Zhixiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 506 (02) : 963 - 968
  • [7] Fabrication of NiAl-Al2O3-WC nanocomposite by mechanical alloying and subsequent heat treatment
    Goudarzi, A.
    Lalianpour, A.
    Mehrizi, M. Zarezadeh
    Beygi, R.
    Eisaabadi, G. B.
    CERAMICS INTERNATIONAL, 2019, 45 (15) : 19049 - 19054
  • [8] Formation of intermetallic nanocomposites in the Ti–Al–Si system by mechanical alloying and subsequent heat treatment
    K. W. Liu
    J. S. Zhang
    J. G. Wang
    G. L. Chen
    Journal of Materials Research, 1998, 13 : 1198 - 1203
  • [9] Nanostructured titanium aluminides prepared by mechanical alloying and subsequent thermal treatment
    Kumaran, S.
    Sasikumar, T.
    Arockiakumar, R.
    Rao, T. Srinivasa
    POWDER TECHNOLOGY, 2008, 185 (02) : 124 - 130
  • [10] Synthesis of Ti3SnC2-Al2O3 composite by mechanical alloying and subsequent heat treatment
    Cao, Yan
    Mehrizi, Majid Zarezadeh
    Rajhi, Ali A.
    Alamri, Sagr
    Anqi, Ali E.
    CERAMICS INTERNATIONAL, 2022, 48 (02) : 2415 - 2420
12345