Optimization of the electric arc furnace process at Deutsche Edelstahlwerke

被引：0

作者：

Risonarta, Victor Yuardi ^{[1
]}

Echterhof, Thomas ^{[1
]}

Voj, Lukas ^{[1
]}

Pfeifer, Herbert ^{[1
]}

Jung, Hans Peter ^{[2
]}

Lenz, Stefan ^{[3
]}

机构：

[1] Rhein Westfal TH Aachen, Dept Ind Furnaces & Heat Engn, Aachen, Germany

[2] Deutsch Edelstahlwerke GmbH, Dept Res & Dev, Siegen, Germany

[3] Deutsch Edelstahlwerke GmbH, Melting Dept, Siegen, Germany

来源：

STAHL UND EISEN | 2009年 / 129卷 / 11期

关键词：

CARBON; GAS;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

During stainless steel production in the electric arc furnace, oxygen is injected to oxidize unwanted tramp elements, mainly carbon and silicon. Unfortunately, oxygen also oxidizes elements valuable to the process, e.g. iron and chromium which causes an economical loss and a bad environmental impact. An off-gas analysis was introduced at Deutsche Edelstahlwerke GmbH to monitor the decarburization process so that element oxidation, not only decarburization, and oxygen consumption can be well controlled. This paper presents a new strategy to control the element oxidation as well as to increase the efficiency of the oxygen injection. For the investigated heat, a well-controlled decarburization would decrease the oxygen consumption by about 10 %.

引用

页码：S55 / +

页数：6

共 50 条

[31] The taphole in an electric arc furnace
Muehlboeck, DG
Hoss, ML
[J]. 58TH ELECTRIC FURNACE CONFERENCE AND 17TH PROCESS TECHNOLOGY CONFERENCE PROCEEDINGS, 2000, 17 : 391 - 399
[32] Modernization of electric arc furnace
[J]. Stal', 2002, (03): : 78 - 80
[33] DC electric arc furnace
不详
[J]. AMERICAN CERAMIC SOCIETY BULLETIN, 1996, 75 (11): : 20 - 20
[34] REFRACTORS FOR ELECTRIC ARC FURNACE
DELISE, A
[J]. METALLURGIA ITALIANA, 1971, 63 (07): : 209 - &
[35] Power profile optimization in tenaris tamsa's electric arc furnace
Ortiz, Francisco Raul Aguirre
Paredes, Pablo Enoc Hernández
[J]. Iron and Steel Technology, 2020, 17 (01): : 66 - 74
[36] The Application of Multiobjective Optimization Technique to the Estimation of Electric Arc Furnace Parameters
Illahi, Fazal
El-Amin, Ibrahim
Mukhtiar, Muhammad Usman
[J]. IEEE TRANSACTIONS ON POWER DELIVERY, 2018, 33 (04) : 1727 - 1734
[37] Injection into the electric arc furnace
Lessel, G
Laux, T
[J]. INJECTION TECHNOLOGY IN IRONMAKING AND STEELMAKING, 1996, : 137 - 147
[38] Electric arc furnace roundup
不详
[J]. AMERICAN CERAMIC SOCIETY BULLETIN, 1998, 77 (07): : 22 - 22
[39] The evolution of the electric arc furnace
Dolle, G
[J]. REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1995, 92 (10-11): : 1177 - 1186
[40] Optimization of the Injectors Position for an Electric Arc Furnace by using CFD Simulation
Coskun, G.
Sarikaya, C.
Buyukkaya, E.
Kucuk, H.
[J]. JOURNAL OF APPLIED FLUID MECHANICS, 2023, 16 (02) : 233 - 243

← 1 2 3 4 5 →