ON THE FLAME-FLOW INTERACTION UNDER DISTRIBUTED COMBUSTION CONDITIONS

Colorless Distributed Combustion (CDC) has shown significant improvements in terms of high combustion efficiency, ultra-low pollutants emission, low combustion noise, uniform thermal field, and enhanced stability. Colorless distributed combustion is fostered through reduced oxygen concentration and high temperature oxidizer to result in distributed reaction over a larger volume of the combustor and uniform thermal field. In this paper, the interaction between fluid mechanics (velocity field, characterized through particle image velocimetry) and the reaction-region (identified through hydroxyl planar laser induced fluorescence) is investigated with focus on swirl assisted distributed combustion. Nitrogen/Carbon Dioxide mixture was added to the normal air upstream of the burner to simulate the hot reactive gases. Comparing the PIV data for reacting conditions with OH-PLIF revealed significant difference between normal swirl and CDC flames. In swirl flame, the flame was located around the shear layer of the entry jet (with both the inner and outer recirculation zones) where the velocity fluctuations and OH-PLIF fluctuations coincided. Flame transitioning to CDC pushed the reaction zone further downstream to locate at a position of lower velocity than what was found for swirl flames. In addition, the reaction zone occupied a much larger volume with lower signal intensity to exhibit distributed reaction. Experiments performed at same flow rates and velocities but with no reduction in oxygen concentration confirmed that the change in reaction behavior is attributed to the lower oxygen concentration rather than the increased flowrates due to dilution.