Integrated modeling and control of a PEM fuel cell power system with a PWM DC/DC converter

被引:34
|
作者
Choe, Song-Yul [1 ]
Lee, Jung-Gi
Ahn, Jong-Woo
Baek, Soo-Hyun
机构
[1] Auburn Univ, Dept Mech Engn, Auburn, AL 36848 USA
[2] Pohang Univ Sci & Technol, Dept Elect Engn, Pohang, South Korea
[3] Dongguk Univ, Dept Elect Engn, Seoul, South Korea
关键词
PEMFC; DC/DC PWM converter; air; coolant and power flow control;
D O I
10.1016/j.jpowsour.2006.10.082
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A fuel cell powered system is regarded as a high current and low voltage source. To boost the output voltage of a fuel cell, a DC/DC converter is employed. Since these two systems show different dynamics, they need to be coordinated to meet the demand of a load. This paper proposes models for the two systems with associated controls, which take into account a PEM fuel cell stack with air supply and thermal systems, and a PWM DC[DC converter. The integrated simulation facilitates optimization of the power control strategy, and analyses of interrelated effects between the electric load and the temperature of cell components. In addition, the results show that the proposed power control can coordinate the two sources with improved dynamics and efficiency at a given dynamic load. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:614 / 623
页数:10
相关论文
共 50 条
  • [21] High power DC-DC converter and fuel cell distributed generation system
    Xu, HP
    Wen, XH
    Kong, L
    CONFERENCE RECORD OF THE 2004 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4: COVERING THEORY TO PRACTICE, 2004, : 1134 - 1139
  • [22] A novel wide stability control strategy of cascade DC power system for PEM Fuel Cell
    Pang, Shengzhao
    Huangfu, Yigeng
    Nahid-Mobarakeh, Babak
    Gao, Fei
    PROCEEDINGS OF THE IECON 2016 - 42ND ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2016, : 5455 - 5460
  • [23] Modeling and control of a dc-dc resonant converter interfacing fuel cell in electric vehicle
    Farhani, Slah
    Bacha, Faouzi
    2018 9TH INTERNATIONAL RENEWABLE ENERGY CONGRESS (IREC), 2018,
  • [24] Modelling and simulation of a polymer electrolyte membrane fuel cell system with a PWM DC/DC converter for stationary applications
    Lee, J. -G.
    Choe, S. -Y.
    Ahn, J. -W.
    Baek, S. -H.
    IET POWER ELECTRONICS, 2008, 1 (03) : 305 - 317
  • [25] A review on DC/DC converter architectures for power fuel cell applications
    Kolli, Abdelfatah
    Gaillard, Arnaud
    De Bernardinis, Alexandre
    Bethoux, Olivier
    Hissel, Daniel
    Khatir, Zoubir
    ENERGY CONVERSION AND MANAGEMENT, 2015, 105 : 716 - 730
  • [26] DESIGN OF CURRENT SOURCE DC/DC CONVERTER FOR INTERFACING A 5 kW PEM FUEL CELL
    Andreiciks, A.
    Steiks, I.
    Krievs, O.
    LATVIAN JOURNAL OF PHYSICS AND TECHNICAL SCIENCES, 2013, 50 (04) : 14 - 21
  • [27] Power conditioning System for Fuel Cell with 2-Stage DC-DC Converter
    Han, Byung M.
    Lee, Jun-Young
    Jeong, Yu-Seok
    2010 TWENTY-FIFTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC), 2010, : 303 - 308
  • [28] Design and control of a fuel cell DC/DC converter for embedded applications
    Narjiss, Abdellah
    Depernet, Daniel
    Gustin, Frederic
    Hissel, Daniel
    Berthon, Alain
    2007 EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-10, 2007, : 1013 - 1022
  • [29] Investigation of Hydrogen Production System-Based PEM EL: PEM EL Modeling, DC/DC Power Converter, and Controller Design Approaches
    Koundi, Mohamed
    El Fadil, Hassan
    EL Idrissi, Zakaria
    Lassioui, Abdellah
    Intidam, Abdessamad
    Bouanou, Tasnime
    Nady, Soukaina
    Rachid, Aziz
    CLEAN TECHNOLOGIES, 2023, 5 (02): : 531 - 568
  • [30] Control of a Fuel Cell Stack loaded with DC/DC Boost Converter
    Bjazic, Toni
    Ban, Zeljko
    Volaric, Igor
    2008 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, VOLS 1-5, 2008, : 2165 - 2170