Microstructure and tribological performance of a dimpled gradient nanoscale TiN layer

被引：20
|
作者：
Zhang, Baosen [1 ,2 ]
Zhu, Shuaishuai [1 ,2 ]
Wang, Zhangzhong [1 ,2 ]
Zhou, Hengzhi [1 ,2 ]
机构：
[1] Nanjing Inst Technol, Sch Mat Engn, Nanjing 211167, Jiangsu, Peoples R China
[2] Jiangsu Key Lab Adv Struct Mat & Applicat Technol, Nanjing 211167, Jiangsu, Peoples R China
来源：
MATERIALS LETTERS | 2016年 / 169卷
基金：
中国国家自然科学基金;
关键词：
Dimpled TiN layer; Gradient nanoscale structure; Multilayer structure; Surfaces; Glow-discharge plasma nitriding; Tribological performance; TITANIUM NITRIDE; COATINGS; DEPOSITION; ALLOY;
D O I：
10.1016/j.matlet.2016.01.085
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The dimpled gradient nanoscale TiN (nano-TiN) layer was prepared on the pure Ti surface by the combined process of supersonic fine particles bombarding (SFPB) and glow-discharge plasma nitriding. A large numbers of dimples (30-40 mu m in diameter) homogenously distribute on the prepared nano-TiN layer surface and are beneficial to the reservation of oil and wear debris during friction process. The nano-TiN layer is about 25 mu m in thickness with a three-layered nanoscale structure and the grain size decreases sequentially from the outer layer to the inner one. The nano-TiN layer with higher mechanical properties displays enhanced friction and wear reducing effects compared to the SFPB-dimpled Ti surface. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：214 / 217
页数：4
相关论文
共 50 条
  • [1] Tribological properties of dimpled surface alloying layer on carbon steel
    Yi Wan
    Dangsheng Xiong
    Jun Wang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2009, 24 : 218 - 222
  • [2] Tribological Properties of Dimpled Surface Alloying Layer on Carbon Steel
    Wan Yi
    Xiong Dangsheng
    Wang Jun
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2009, 24 (02): : 218 - 222
  • [3] Tribological Properties of Dimpled Surface Alloying Layer on Carbon Steel
    万轶
    Journal of Wuhan University of Technology(Materials Science), 2009, (02) : 218 - 222
  • [4] Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films
    Lyu, Yanhong
    Zhang, Qiaoyu
    Liu, Yang
    Deng, Xinrong
    Sun, Huilian
    Mo, Min
    LUBRICANTS, 2023, 11 (01)
  • [5] Tribological performance of dimpled thrust bearings with phyllotactic patterns
    Lu Yushan
    Liu Yueming
    Wang Jun
    Liu Hongpeng
    WEAR, 2016, 346 : 108 - 115
  • [6] Evolution of the microstructure and tribological performance of Ti-6Al-4V cladding with TiN powder
    Lin, Yu-Chi
    Lin, Yuan-Ching
    Chen, Yong-Chwang
    MATERIALS & DESIGN, 2012, 36 : 584 - 589
  • [7] Effect of deposition pressure on microstructure and tribological behavior of MoSx/MoSx-Mo nanoscale multi-layer films
    Chen, L. M.
    Tu, J. P.
    Zhang, S. C.
    Peng, S. M.
    Gu, B.
    TRIBOLOGY LETTERS, 2007, 25 (02) : 87 - 91
  • [8] Effect of deposition pressure on microstructure and tribological behavior of MoSx/MoSx-Mo nanoscale multi-layer films
    L.M. Chen
    J.P. Tu
    S.C. Zhang
    S.M. Peng
    B. Gu
    Tribology Letters, 2007, 25 : 87 - 91
  • [9] TiN, TiN gradient and Ti/TiN multi-layer protective coatings on Uranium
    Liu, Tianwei
    Dong, Chuang
    Wu, Sheng
    Tang, Kai
    Wang, Jiayong
    Jia, Jianping
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (15): : 6737 - 6741
  • [10] Effect of Gradient Multilayer Design on Tribological Performance of TiN/TiSiN Coatings Prepared by Cathodic Arc Ion Plating
    Tu, Rong
    Jiao, Jiao
    Jiang, Mingquan
    Yang, Mai
    Ji, Baifeng
    Gao, Tenghua
    Li, Qizhong
    Zhang, Song
    Zhang, Lianmeng
    COATINGS, 2023, 13 (05)
12345