The effect of weak inertia in rotating high-aspect-ratio vessel bioreactors

被引:4
|
作者
Dalwadi, Mohit P. [1 ]
Chapman, S. Jonathan [2 ]
Oliver, James M. [2 ]
Waters, Sarah L. [2 ]
机构
[1] Univ Nottingham, Synthet Biol Res Ctr, Nottingham NG7 2RD, England
[2] Univ Oxford, Math Inst, Oxford OX2 6GG, England
基金
英国工程与自然科学研究理事会;
关键词
bifurcation; biological fluid dynamics; lubrication theory; TISSUE-ENGINEERED CARTILAGE; BOUNDARY-LAYER PROBLEM; HELE-SHAW CELL; SIMILARITY SOLUTIONS; SECONDARY FLOW; FLUID-FLOW; GROWTH; MICROGRAVITY; MODEL;
D O I
10.1017/jfm.2017.760
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
One method to grow artificial body tissue is to place a porous scaffold seeded with cells, known as a tissue construct, into a rotating bioreactor filled with a nutrient-rich fluid. The flow within the bioreactor is affected by the movement of the construct relative to the bioreactor which, in turn, is affected by the hydrodynamical and gravitational forces the construct experiences. The construct motion is thus coupled to the flow within the bioreactor. Over the time scale of a few hours, the construct appears to move in a periodic orbit but, over tens of hours, the construct drifts from periodicity. In the biological literature, this effect is often attributed to the change in density of the construct that occurs via tissue growth. In this paper, we show that weak inertia can cause the construct to drift from its periodic orbit over the same time scale as tissue growth. We consider the coupled flow and construct motion problem within a rotating high-aspect-ratio vessel bioreactor. Using an asymptotic analysis, we investigate the case where the Reynolds number is large but the geometry of the bioreactor yields a small reduced Reynolds number, resulting in a weak inertial effect. In particular, to accurately couple the bioreactor and porous flow regions, we extend the nested boundary layer analysis of Dalwadi et al. (J. Fluid Mech., vol. 798, 2016, pp. 88-139) to include moving walls and the thin region between the porous construct and the bioreactor wall. This allows us to derive a closed system of nonlinear ordinary differential equations for the construct trajectory, from which we show that neglecting inertia results in periodic orbits; we solve the inertia-free problem analytically, calculating the periodic orbits in terms of the system parameters. Using a multiple-scale analysis, we then systematically derive a simpler system of nonlinear ordinary differential equations that describe the long-time drift of the construct due to the effect of weak inertia. We investigate the bifurcations of the construct trajectory behaviour, and the limit cycles that appear when the construct is less dense than the surrounding fluid and the rotation rate is large enough. Thus, we are able to predict when the tissue construct will drift towards a stable limit cycle within the bioreactor and when it will drift out until it hits the bioreactor edge.
引用
收藏
页码:674 / 720
页数:47
相关论文
共 50 条
  • [41] Development of the micromilling process for high-aspect-ratio microstructures
    Friedrich, CR
    Vasile, MJ
    JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 1996, 5 (01) : 33 - 38
  • [42] HIGH-ASPECT-RATIO SI ETCHING FOR MICROSENSOR FABRICATION
    JUAN, WH
    PANG, SW
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1995, 13 (03): : 834 - 838
  • [43] High-Aspect-Ratio Nanostructured Surfaces as Biological Metamaterials
    Higgins, Stuart G.
    Becce, Michele
    Belessiotis-Richards, Alexis
    Seong, Hyejeong
    Sero, Julia E.
    Stevens, Molly M.
    ADVANCED MATERIALS, 2020, 32 (09)
  • [44] Rinsing of High-Aspect-Ratio Features on Patterned Wafers
    Chiang, Chieh-Chun
    Kishore, Jivaan
    Raghavan, Srini
    Shadman, Farhang
    IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 2017, 30 (01) : 60 - 68
  • [45] On the Use of High-Aspect-Ratio Film Cooling Scheme
    Li, Hao-Ming
    Ghaly, Wahid
    Hassan, Ibrahim
    HEAT TRANSFER ENGINEERING, 2022, 43 (06) : 547 - 566
  • [46] Ultrasharp High-aspect-ratio Tetrahedral Molded Tips
    Vermeer, Rolf
    Berenschot, Erwin
    Sarajlic, Edin
    Tas, Niels
    SENSORS AND MATERIALS, 2019, 31 (09) : 2811 - 2823
  • [47] Recent advance in high-aspect-ratio composite wing
    Xiang J.
    Zhang X.
    Zhao S.
    Cheng Y.
    Zhang Z.
    Li D.
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2017, 49 (10): : 1 - 14
  • [48] A hybrid high-aspect-ratio trench standard template
    Zhao L.
    Zhang X.
    Lei L.
    Yuan Q.
    Li S.
    Liang F.
    Wu A.
    Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering, 2023, 52 (04):
  • [49] Limit cycle oscillations in high-aspect-ratio wings
    Patil, Mayuresh J.
    Hodges, Dewey H.
    Cesnik, Carlos E.S.
    Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1999, 3 : 2184 - 2194
  • [50] Injection compression molding of high-aspect-ratio nanostructures
    Nagato, Keisuke
    Hamaguchi, Tetsuya
    Nakao, Masayuki
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2011, 29 (06):