Synthesis of unsaturated polyesters for improved interfacial strength in carbon fibre composites

被引:48
|
作者
Gamstedt, EK [1 ]
Skrifvars, M
Jacobsen, TK
Pyrz, R
机构
[1] Royal Inst Technol, KTH, Dept Solid Mech, SE-10044 Stockholm, Sweden
[2] SICOMP AB, SE-94126 Pitea, Sweden
[3] LM Glasfiber AS, DK-6640 Lunderskov, Denmark
[4] Univ Aalborg, Inst Engn Mech, DK-9220 Aalborg, Denmark
关键词
carbon fibre; interface/interphase; stress transfer; chemistry;
D O I
10.1016/S1359-835X(02)00077-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Carbon fibres are gaining use as reinforcement in glass fibre/polyester composites for increased stiffness as a hybrid composite. The mechanics and chemistry of the carbon fibre-polyester interface should be addressed to achieve an improvement also in fatigue performance and off-axis strength. To make better use of the versatility of unsaturated polyesters in a carbon fibre composite, a set of unsaturated polyester resins have been synthesized with different ratios of maleic anhydride, o-phthalic anhydride and 1,2-propylene glycol as precursors. The effective interfacial strength was determined by micro-Raman spectroscopy of a single-fibre composite tested in tension. The interfacial shear strength with untreated carbon fibres increased with increasing degree of unsaturation of the polyester, which is controlled by the relative amount of maleic anhydride. This can be explained by a contribution of chemical bonding of the double bonds in the polymer to the functional groups of the carbon fibre surface. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1239 / 1252
页数:14
相关论文
共 50 条
  • [41] Temperature dependence of the interfacial shear strength in glass-fibre polypropylene composites
    Thomason, J. L.
    Yang, L.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (13) : 1600 - 1605
  • [42] Effects of coating structures on interfacial properties of carbon fibre/polyarylacetylene composites
    Zhang, X. Z.
    Huang, Y. D.
    Wang, T. Y.
    Hu, L. J.
    POLYMERS & POLYMER COMPOSITES, 2007, 15 (01): : 35 - 42
  • [43] Interfacial properties and mechanical performance of hybrid graphene/ carbon fibre composites
    Koutroumanis, Nikos
    Manikas, Anastasios C.
    Pappas, Panagiotis Nektarios
    Anagnostopoulos, George
    Galiotis, Costas
    MATERIALS TODAY COMMUNICATIONS, 2024, 41
  • [44] Temperature dependence of the interfacial shear strength in glass-fibre epoxy composites
    Thomason, J. L.
    Yang, L.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 96 : 7 - 12
  • [45] Effect of nanoparticles on interfacial properties of carbon fibre-epoxy composites
    Zhang, Jianing
    Deng, Shiqiang
    Wang, Yulong
    Ye, Lin
    Zhou, Limin
    Zhang, Zhong
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 55 : 35 - 44
  • [46] COMPRESSIVE STRENGTH OF UNIDIRECTIONAL AND CROSSPLY CARBON FIBRE/PEEK COMPOSITES
    KOMINAR, V
    NARKIS, M
    SIGEMANN, A
    VAXMAN, A
    JOURNAL OF MATERIALS SCIENCE, 1995, 30 (10) : 2620 - 2627
  • [47] Influence of fibre surface oxidation treatment on mechanical interfacial properties of carbon fibre/polyarylacetylene composites
    Fu, HJ
    Huang, YD
    Liu, L
    MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (12) : 1655 - 1660
  • [48] Interfacial characterization and reinforcing mechanism of novel carbon nanotube - Carbon fibre hybrid composites
    Li, Quanxiang
    Church, Jeffrey S.
    Naebe, Minoo
    Fox, Bronwyn L.
    CARBON, 2016, 109 : 74 - 86
  • [49] Effect of fibre-matrix interfacial strength on the explosive blast resistance of carbon fibre laminates
    Gargano, A.
    Pingkarawat, K.
    Pickerd, V. L.
    Ibrahim, M. E.
    Mouritz, A. P.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 138 : 68 - 79
  • [50] Enzymatic synthesis and characterization of unsaturated polyesters
    Kumar, R
    Sharma, AK
    Canteenwala, TC
    Parmar, VS
    Kumar, J
    Watterson, AC
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2005, 230 : U4062 - U4062