Simulation of single screw extrusion of wood plastic composites based on the on-line pressure measurements

被引:7
|
作者
Wilczynski, Krzysztof J. [1 ]
Buziak, Kamila [1 ]
机构
[1] Warsaw Univ Technol, Fac Prod Engn, Inst Mfg Technol, Narbutta 85, PL-02524 Warsaw, Poland
关键词
single screw extrusion; wood plastic composites; modeling; COMPUTER-MODEL; RHEOLOGY; MELT;
D O I
10.14314/polimery.2019.2.7
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Simulation and experimental tests of single screw extrusion of wood plastic composite (WPC) based on the polypropylene (PP) matrix were carried out. The rheological properties of the composite were determined on the basis of measurements of the pressure and material flow rate during extrusion. Recently developed computer model for simulating the single screw extrusion of wood plastic composites was applied which has been modified by extending its computing capabilities to calculations based on the power law rule. This computer model allows two-variant modeling the material melting depending on the wood flour content. The results of simulation were verified experimentally, and it was found that the results of simulations and measurements were in a good agreement. Smaller discrepancies were observed in the case of the use of one-dimensional model of melting.
引用
收藏
页码:135 / 142
页数:8
相关论文
共 50 条
  • [41] Extrusion of foamed wood-plastic composites. Part I: Physical and morphological characterization
    Moreno, Pablo A.
    Ballerini, Aldo
    Gacitua, William
    Rodrigue, Denis
    REVISTA CHAPINGO SERIE CIENCIAS FORESTALES Y DEL AMBIENTE, 2017, 23 (03): : 385 - 400
  • [42] Design and simulation analysis of an extrusion structure based on screw extrusion 3D printing
    Liu, Biaoqiang
    Qian, Bo
    Hu, Zhentao
    Liang, Yuxin
    Fan, Hongri
    INTERNATIONAL POLYMER PROCESSING, 2024, 39 (04) : 497 - 511
  • [43] Optimizing torque rheometry parameters for assessing the rheological characteristics and extrusion processability of wood plastic composites
    Feng, Chuanxin
    Li, Zewen
    Wang, Zhouyi
    Wang, Bingren
    Wang, Zhe
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2019, 32 (01) : 123 - 140
  • [44] Mechanical and morphological properties of wood plastic composites based on municipal plastic waste
    Kazemi, Yasamin
    Cloutier, Alain
    Rodrigue, Denis
    POLYMER COMPOSITES, 2013, 34 (04) : 487 - 493
  • [45] Dynamic modeling and simulation of drum-steam pressure based on lots of on-line data
    Zhang, Xiao-Tao
    Ni, Wei-Dou
    Li, Zheng
    Zheng, Song
    Dongli Gongcheng/Power Engineering, 2004, 24 (03):
  • [46] Study of Wood Plastic Composites elastic behaviour using full field measurements
    Ben Mbarek, T.
    Robert, L.
    Hugot, F.
    Orteu, J. -J.
    Sammouda, H.
    Graciaa, A.
    Charrier, B.
    ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6, 2010, 6
  • [47] Effect of on-line ultrasonic treatment on the properties of carbon fiber reinforced plastic composites
    Bing Liu
    Li Liu
    Yudong Huang
    Research on Chemical Intermediates, 2016, 42 : 6745 - 6755
  • [48] Effect of on-line ultrasonic treatment on the properties of carbon fiber reinforced plastic composites
    Liu, Bing
    Liu, Li
    Huang, Yudong
    RESEARCH ON CHEMICAL INTERMEDIATES, 2016, 42 (08) : 6745 - 6755
  • [49] Predicting the tensile properties of wood plastic composites using material extrusion with meta-based Few-Shot learning
    Zeng, Zhuo
    Zhou, Yan
    Wen, Shifeng
    Zhou, Cheng
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2025, 190
  • [50] On-line instrumentation for simulation-based optimization
    Persson, Anna
    Grimm, Henrik
    Ng, Amos
    PROCEEDINGS OF THE 2006 WINTER SIMULATION CONFERENCE, VOLS 1-5, 2006, : 303 - 310