Finite element analysis of laser-diode heat emission and design of PI fuzzy cooling system

被引：0

作者：

Yu, FS ^{[1
]}

Shen, XQ ^{[1
]}

Leng, CL ^{[1
]}

Li, Z ^{[1
]}

机构：

[1] Shandong Inst Architecture & Engn, Jinan 250014, Peoples R China

来源：

SEMICONDUCTOR LASERS AND APPLICATIONS II | 2004年 / 5628卷

关键词：

high-power laser-diode; semiconductor refrigerator; PI; fuzzy; CRI fussy arithmetic;

D O I：

10.1117/12.576528

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

In order to realize the coupling of the crystal spectrum line, the wavelength output by the laser-diode must be adjusted to be accordant with the peak value absorbed by laser crystal in the solid laser of the laser-diode pump. In this paper, the finite element analysis (FEA) of the heat emission of the to-3 encapsulated laser-diode was researched and an accurate PI+Fuzzy temperature control system was developed. The refrigeration and the accurate temperature control of the high-power laser-diode was realized by the semiconductor refrigerator. Combined with fussy control and PI control, a full solid refrigerator of the laser-diode was developed. AT89C51 MCU and CRI[1] fussy control arithmetic were used in this system. So the system has high temperature control precision and little chatting. The rate of change of the optical power peak value output by the laser-diode was less than 1%.

引用

页码：189 / 195

页数：7

共 50 条

[41] Numerical and Finite Element Analysis of Heat Transfer in a Closed Loop Geothermal System
Hemmingway, Phil
Tolooiyan, Ali
INTERNATIONAL JOURNAL OF GREEN ENERGY, 2014, 11 (02) : 206 - 223
[42] Fuzzy logic-based expert system to predict the results of finite element analysis
Rao, Amara Venkata Subba
Pratihar, Dilip Kumar
KNOWLEDGE-BASED SYSTEMS, 2007, 20 (01) : 37 - 50
[43] Design, Finite Element Analysis and Optimization of HRC Trays used in Heat Treatment Process
Nandwana, Dinkar
Bhupendra
Khandelwal, Nikhil
Bhargava, Tushar
Nandwana, Kapil
Jawale, Ganesh
WORLD CONGRESS ON ENGINEERING, WCE 2010, VOL II, 2010, : 1149 - 1154
[44] Finite element method analysis of thermal effect in gradient dopant concentration medium laser end-pumped by laser diode
Liu Q.
Ren G.
Li Y.
Yue T.
Wang L.
Xiao X.
Deng C.
Li J.
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering, 2019, 48 (11):
[45] Design and Thermal Characteristic Analysis of Gearbox System Based on Finite Element Analysis (FEA)
Shukla, Amratansh
Kumar, Ashwani
3RD INTERNATIONAL CONFERENCE ON ADVANCEMENTS IN AEROMECHANICAL MATERIALS FOR MANUFACTURING: ICAAMM-2020, 2021, 2317
[46] A Fuzzy Logic Based Finite Element Analysis for Structural Design of a 6 Axis Industrial Robot
Sahu, S.
Choudhury, B. B.
Muni, M. K.
Biswal, B. B.
COMPUTATIONAL INTELLIGENCE IN DATA MINING, CIDM, VOL 2, 2016, 411 : 201 - 209
[47] Prediction and finite element analysis of the mechanical properties of heat affected zone of laser welded blanks
Yang, Yunzhen (yyzhenhust@hotmail.com), 2016, Harbin Research Institute of Welding (37):
[48] COMBINED EXPERIMENTAL/NUMERICAL METHOD USING INFRARED THERMOGRAPHY AND FINITE ELEMENT ANALYSIS FOR ESTIMATION OF LOCAL HEAT TRANSFER DISTRIBUTION IN AN INTERNAL COOLING SYSTEM
Egger, Christian
von Wolfersdorf, Jens
Schnieder, Martin
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 3A, 2013,
[49] Finite element analysis of heat flow in dual-beam laser welded tailored blanks
Liu, YN
Kannatey-Asibu, E
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1998, 120 (02): : 272 - 278
[50] Combined Experimental/Numerical Method Using Infrared Thermography and Finite Element Analysis for Estimation of Local Heat Transfer Distribution in an Internal Cooling System
Egger, Christian
von Wolfersdorf, Jens
Schnieder, Martin
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2014, 136 (06):

← 1 2 3 4 5 →