An investigation into the influence of geometry on compressed earth building blocks using finite element analysis

被引：12

作者：

Cottrell, Jack A. ^{[1
]}

Ali, Muhammad ^{[1
]}

Tatari, Alireza ^{[1
]}

Martinson, D. Brett ^{[1
]}

机构：

[1] Univ Portsmouth, Sch Civil Engn & Surveying, Portland Bldg,Portland St, Portsmouth PO1 3AH, Hants, England

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2021年 / 273卷

关键词：

Un-stabilised compressed earth blocks; CEB machine; Geometric properties; Compressive and flexural strength; Finite element analysis;

D O I：

10.1016/j.conbuildmat.2020.121997

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper presents a parametric investigation into the influence of geometry on the compressive and flexural strength of un-stabilised compressed earth blocks (CEBs). Three CEBs with dissimilar geometric properties were manufactured and subjected to physical testing and Finite Element Analysis (FEA) using ANSYS Workbench 19.1. The compressive and flexural strength of the CEBs were shown to be dependent on their geometric properties and ranged from 3.74 to 6.73 MPa and 0.63-1.31 MPa respectively. A modified Solid65 element command was utilised within the FEA and was shown to successfully replicate the non-linear elasto-plastic behaviour observed in physical testing. (C) 2020 Elsevier Ltd. All rights reserved.

引用

下载

页数：13

共 50 条

[21] Finite element analysis on the potential for negative thermal expansion and negative compressibility of triangular building blocks
Grima, Joseph N
Gatt, Ruben
Ellul, Brian
Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2009, 37 (05): : 743 - 748
[22] Influence of Implant Length, Diameter, and Geometry on Stress Distribution: A Finite Element Analysis
Anitua, Eduardo
Tapia, Raul
Luzuriaga, Felipe
Orive, Gorka
INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY, 2010, 30 (01) : 89 - 95
[23] Finite Element Analysis of Stent expansion: Influence of Stent Geometry on Performance Parameters
Gomes, I. V.
Puga, H.
Alves, J. L.
Claro, J. C. P.
2017 IEEE 5TH PORTUGUESE MEETING ON BIOENGINEERING (ENBENG), 2017,
[24] Effects of Defect Geometry on MFL Signals Using Finite Element Analysis
Song, Qiang
Lin, Li
PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 2, 2009, : 27 - 31
[25] Investigation of influence of placement schedule on the thermal stresses of RCC dams, using finite element analysis
Noorzaei, J
Ghafouri, HR
Amini, R
ROLLER COMPACTED CONCRETE DAMS, 2003, : 669 - 674
[26] Influence of Particle Size on Compressed Earth Blocks Properties and Strategies for Enhanced Performance
Turco, Chiara
Paula Jr, Adilson
Jacinto, Claudia
Fernandes, Jorge
Teixeira, Elisabete
Mateus, Ricardo
APPLIED SCIENCES-BASEL, 2024, 14 (05):
[27] Compressed Earth Blocks Using Sediments and Alkali-Activated Byproducts
Belayali, Fouad
Maherzi, Walid
Benzerzour, Mahfoud
Abriak, Nor-Edine
Senouci, Ahmed
SUSTAINABILITY, 2022, 14 (06)
[28] Using Finite Element Analysis Methods to Reduce the Failure of Building Structures
Daniel J. Thomas
Journal of Failure Analysis and Prevention, 2020, 20 : 615 - 616
[29] Investigation of ferrocement channels using experimental and finite element analysis
Eskandari, Hamid
Madadi, Amirhossein
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2015, 18 (04): : 769 - 775
[30] Investigation into using finite element analysis for epoxy resin joints
Williamson, C.
Daadbin, A.
Materials and Design, 1993, 14 (02): : 91 - 95

← 1 2 3 4 5 →