ANALYSIS OF THE EFFECTIVE AND INTERNAL CYCLIC STRESS COMPONENTS IN CAST γ-TiAl BASED ALLOY

被引：0

作者：

Petrenec, M. ^{[1
]}

Polak, J. ^{[1
]}

Kruml, T. ^{[1
]}

Bucek, B. ^{[1
]}

机构：

[1] Acad Sci Czech Republic, Inst Phys Mat, Brno 61662, Czech Republic

来源：

ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2011 | 2011年

关键词：

low cycle fatigue; TiAl alloy; hysteresis loop; dislocation structure;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Cyclic strain controlled multiple step tests in air have been performed on cylindrical specimens of cast gamma-based alloy Ti-48Al-2Nb-2Cr-0.82B at. % with nearly lamellar microstructure of gamma and alpha(2) phases at 23 and 750 degrees C. The objective was to analyze the internal and effective cyclic stress components which were derived from the hysteresis loops analyzed according to the statistical theory of hysteresis loop. Dislocation structures in cyclically strained specimens at room temperature were observed using TEM. Cyclic response at both temperatures was compared and discussed in relation to changes of internal and effective stress components and dislocation modes in gamma phase observed and referred in the literature.

引用

页码：921 / +

页数：2

共 50 条

[31] CYCLIC DAMAGE AND FRACTURE IN A CAST NICKEL BASED ALLOY AT HIGH-TEMPERATURE
ELLISON, EG
PLUMBRIDGE, WJ
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1991, 14 (07) : 721 - 739
[32] Effect of very high stress levels on the fatigue life of a TiAl based alloy
Pilé, C
Retraint, D
François, M
Lu, J
RESIDUAL STRESSES VII, PROCEEDINGS, 2005, 490-491 : 418 - 423
[33] Generation Reason and Elimination of Blowhole in Vacuum Suction Cast TiAl-based Alloy Exhaust Valve
Han Baoshuai
Luo Liangshun
Meng Xianyu
Xue Xiang
Wang Liang
Su Yanqing
Guo Jingjie
RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (05) : 1631 - 1636
[34] Generation Reason and Elimination of Blowhole in Vacuum Suction Cast TiAl-based Alloy Exhaust Valve
吸铸TiAl基合金排气阀内部气孔缺陷产生原因分析
Luo, Liangshun (luols@hit.edu.cn), 1631, Science Press (47):
[35] Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy
Han, Jianchao
Xiao, Shulong
Tian, Jing
Chen, Yuyong
Xu, Lijuan
Wang, Xiaopeng
Jia, Yi
Du, Zhaoxin
Cao, Shouzhen
MATERIALS CHARACTERIZATION, 2015, 106 : 112 - 122
[36] Microstructure evolution and tensile properties of conventional cast TiAl-based alloy with trace Ni addition
Han, Jianchao
Dong, Jing
Zhang, Shuzhi
Zhang, Changjiang
Xiao, Shulong
Chen, Yuyong
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 715 : 41 - 48
[37] Grain refinement of cast peritectic TiAl-based alloy by solid-state phase transformations
Kamyshnykova, K.
Lapin, J.
KOVOVE MATERIALY-METALLIC MATERIALS, 2018, 56 (05): : 277 - 287
[38] Microstructure and high temperature strength of direct-cast gamma TiAl-based alloy sheet
Hanamura, T
Hashimoto, K
MATERIALS TRANSACTIONS JIM, 1997, 38 (07): : 599 - 606
[39] Microstructural instability of a TiAl-based alloy during rapid heating cyclic heat treatment
Peng, Chaoqun
Huang, Baiyun
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2004, 33 (04): : 363 - 367
[40] Microstructural instability of a TiAl-based alloy during rapid heating cyclic heat treatment
Peng, CQ
Huang, BY
RARE METAL MATERIALS AND ENGINEERING, 2004, 33 (04) : 363 - 367

← 1 2 3 4 5 →