Vibration welding nylon 66 - Part II - Finite element analysis

被引：4
|
作者：
Bates, PJ
MacDonald, JJ
Wang, CY
Liang, H
机构：
[1] Royal Mil Coll Canada, Kingston, ON K7K 7B4, Canada
[2] Queens Univ, Ctr Automot Mat & Mfg, Kingston, ON K7L 3N6, Canada
[3] DuPont Canada, Kingston, ON, Canada
来源：
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS | 2003年 / 16卷 / 03期
关键词：
vibration welding; short glass fiber reinforced nylon 66; unreinforced nylon 66; nonlinear finite element analysis; welded joint; failure and strength;
D O I：
10.1177/0892705703016003001
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The stress fields of vibration welded joints under different loading and boundary conditions were obtained using an elastic-plastic finite element model with a weld zone. The stress analysis focused on the effect of material and geometry on the joint strength. T-welded and cup-plaque welded joints were chosen to study the effect of geometry on joint strength. The results of the analysis were compared with the experimental data of unreinforced and 33% glass reinforced nylon 66. The numerical FEA results successfully explain the experimental strength and failure mode observed on complex joint geometries.
引用
下载
收藏
页码：197 / 211
页数：15
相关论文
共 50 条
  • [41] Linear vibration analysis of laminated rectangular plates using the hierarchical finite element method - II. Forced vibration analysis
    Univ of Southampton, Southampton, United Kingdom
    Comput Struct, 4 (713-724):
  • [42] Transient finite element analysis of ultrasonic welding of PEEK
    王晓林
    李瑞琦
    闫久春
    杨士勤
    China Welding, 2006, (02) : 55 - 59
  • [43] The optimized performance of linear vibration welded nylon 6 and nylon 66 butt joints
    Kagan, V
    Lui, SC
    Smith, GR
    Patry, J
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 1266 - 1274
  • [44] The Behavior of compressively loaded stiffener runout specimens - Part II: Finite element analysis
    Falzon, BG
    Hitchings, D
    JOURNAL OF COMPOSITE MATERIALS, 2003, 37 (06) : 481 - 501
  • [45] Resistance spot welding of aluminum alloy to steel with transition material - Part II: Finite element analyses of nugget growth
    Sun, X
    Khaleel, MA
    WELDING JOURNAL, 2004, 83 (07) : 197S - 202S
  • [46] Finite element analysis - A numerical tool for machinery vibration analysis
    Sayer, RJ
    SOUND AND VIBRATION, 2004, 38 (05): : 18 - 22
  • [47] Finite element simulation of fixed dental prostheses made from PMMA -Part II: Material modeling and nonlinear finite element analysis
    Schrader, Peer
    Kolling, Stefan
    Schlenz, Maximiliane Amelie
    Wostmann, Bernd
    Schmidt, Alexander
    DENTAL MATERIALS JOURNAL, 2021, 40 (04) : 894 - 902
  • [48] A method for the vibration analysis of built-up structures, part II: Analysis of the plate-stiffened beam using a combination of finite element analysis and analytical impedances
    Grice, RM
    Pinnington, RJ
    JOURNAL OF SOUND AND VIBRATION, 2000, 230 (04) : 851 - 875
  • [49] Vibration Analysis of Steam Turbine Blade: A Finite Element Analysis
    Amini, Kourosh
    Heidari, Milad
    ADVANCED SCIENCE LETTERS, 2018, 24 (12) : 9026 - 9030
  • [50] Vibration analysis of ball bearing using Finite Element Analysis
    Apandi, N. S. R.
    Ismail, R.
    Abdollah, M. F. B.
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD), 2017, : 480 - 482
12345