Evaluation of fracture toughness of small volumes by means of cube-corner nanoindentation

被引：41
|
作者：
Cuadrado, N. [1 ]
Casellas, D. [1 ,2 ]
Anglada, M. [3 ]
Jimenez-Pique, E. [3 ]
机构：
[1] Fundacio CTM Ctr Tecnol, Manresa 08242, Spain
[2] Univ Politecn Cataluna, Dept Mat Sci & Met Engn, EPSEM, Manresa 08242, Spain
[3] Univ Politecn Cataluna, Dept Mat Sci & Met Engn, ETSEIB, E-08028 Barcelona, Spain
来源：
SCRIPTA MATERIALIA | 2012年 / 66卷 / 09期
关键词：
Nanoindentation; Fracture toughness; Cube-corner indenter; Crack morphology; INDENTATION FRACTURE; MECHANICAL-PROPERTIES; SINGLE-CRYSTAL; THIN-FILMS; GLASS; COATINGS; CRACKING; LOAD; SI;
D O I：
10.1016/j.scriptamat.2012.01.033
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this work, the applicability of the two most commonly used equations for calculating the fracture toughness by nanoindentation is discussed in terms of indenter geometry and indentation crack morphology. These equations are calibrated for Berkovich and cube-corner indenters taking into account the actual indentation crack morphology, in order to attain a more reliable estimation of fracture toughness in small material volumes by nanoindentation. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：670 / 673
页数：4
相关论文
共 49 条
  • [1] A method to determine fracture toughness using cube-corner indentation
    Zhang, Taihua
    Feng, Yihui
    Yang, Rong
    Jiang, Peng
    SCRIPTA MATERIALIA, 2010, 62 (04) : 199 - 201
  • [2] Comparison of nanoindentation results obtained with Berkovich and cube-corner indenters
    Chudoba, T.
    Schwaller, P.
    Rabe, R.
    Breguet, J. -M.
    Michler, J.
    PHILOSOPHICAL MAGAZINE, 2006, 86 (33-35) : 5265 - 5283
  • [3] Geometry of nanoindentation cube-corner cracks observed by FIB tomography: Implication for fracture resistance estimation
    Cuadrado, N.
    Seuba, J.
    Casellas, D.
    Anglada, M.
    Jimenez-Pique, E.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (10) : 2949 - 2955
  • [4] Orientation-dependent hardness of Mo3Si studied by cube-corner nanoindentation
    Yang, Weiguang
    Hasemann, Georg
    Schwaiger, Ruth
    Krueger, Manja
    JOURNAL OF MATERIALS SCIENCE, 2024, 59 (01) : 277 - 288
  • [5] Orientation-dependent hardness of Mo3Si studied by cube-corner nanoindentation
    Weiguang Yang
    Georg Hasemann
    Ruth Schwaiger
    Manja Krüger
    Journal of Materials Science, 2024, 59 : 277 - 288
  • [6] Cohesive Toughness Of Low-k Film With Periodically Changing Elastic Modulus: Cube-Corner Indentation
    Yeap, Kong Boon
    Hangen, Ude
    Ritz, Yvonne
    Kim, Taek-Soo
    Dauskardt, Reinhold
    Zsehech, Ehrenfried
    STRESS-INDUCED PHENOMENA IN METALLIZATION, 2010, 1300 : 159 - +
  • [7] Radial Fracture During Indentation by Acute Probes: II, Experimental Observations of Cube-corner and Vickers Indentation
    Dylan J. Morris
    Aaron M. Vodnick
    Robert F. Cook
    International Journal of Fracture, 2005, 136 : 265 - 284
  • [8] Radial fracture during indentation by acute probes: II, Experimental observations of cube-corner and Vickers indentation
    Morris, DJ
    Vodnick, AM
    Cook, RF
    INTERNATIONAL JOURNAL OF FRACTURE, 2005, 136 (1-4) : 265 - 284
  • [9] Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting
    Bruns, Sebastian
    Petho, Laszlo
    Minnert, Christian
    Michler, Johann
    Durst, Karsten
    MATERIALS & DESIGN, 2020, 186
  • [10] A technique for measuring stresses in small spatial regions using cube-corner indentation: Application to tempered glass plates
    Tandon, Rajan
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (06) : 2407 - 2414
12345