Scanning Speed Effect on Mechanical Properties of Ti-6Al-4V Alloy Processed by Electron Beam Additive Manufacturing

被引：57

作者：

Wang, Xiaoqing ^{[1
]}

Gong, Xibing ^{[1
]}

Chou, Kevin ^{[1
]}

机构：

[1] Univ Alabama, Dept Mech Engn, Tuscaloosa, AL 35487 USA

来源：

43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 | 2015年 / 1卷

关键词：

Electron beam additive manufacturing; mechanical properties; manoindentation; microstructure; Ti-6Al-4V alloy; LASER; NANOINDENTATION; MICROSTRUCTURES;

D O I：

10.1016/j.promfg.2015.09.026

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, mechanical properties in Ti-6Al-4V samples built with the powder-bed electron beam additive manufacturing (EBAM) process over a range of beam scanning speeds were experimentally investigated. Four levels of speed functions were applied to build samples, which were used to prepare the specimens for the nanoindentation test to obtain their mechanical properties. The measured averaged Young's modulus and hardness are about 111.7 similar to 119.0 GPa and 5.24 similar to 6.52 GPa, respectively. It has been found that the Young's modulus and hardness increase with the increase of scanning speed in EBAM. The scanning surface presents more superior mechanical properties than those from side surface. The mechanical properties are also correlated to the microstructure characterization of EBAM components.

引用

页码：287 / 295

页数：9

共 50 条

[31] Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
H. P. Tang
M. Qian
N. Liu
X. Z. Zhang
G. Y. Yang
J. Wang
[J]. JOM, 2015, 67 : 555 - 563
[32] Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing
Mahbooba, Zaynab
West, Harvey
Harrysson, Ola
Wojcieszynski, Andrzej
Dehoff, Ryan
Nandwana, Peeyush
Horn, Timothy
[J]. JOM, 2017, 69 (03) : 472 - 478
[33] Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing
Zaynab Mahbooba
Harvey West
Ola Harrysson
Andrzej Wojcieszynski
Ryan Dehoff
Peeyush Nandwana
Timothy Horn
[J]. JOM, 2017, 69 : 472 - 478
[34] Structural design and mechanical response of gradient porous Ti-6Al-4V fabricated by electron beam additive manufacturing
Wu, Y. C.
Kuo, C. N.
Shie, M. Y.
Su, Y. L.
Wei, L. J.
Chen, S. Y.
Huang, J. C.
[J]. MATERIALS & DESIGN, 2018, 158 : 256 - 265
[35] Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting
Tan, Xipeng
Kok, Yihong
Tan, Yu Jun
Descoins, Marion
Mangelinck, Dominique
Tor, Shu Beng
Leong, Kah Fai
Chua, Chee Kai
[J]. ACTA MATERIALIA, 2015, 97 : 1 - 16
[36] Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy
N. S. Pushilina
V. A. Klimenov
R. O. Cherepanov
E. B. Kashkarov
V. V. Fedorov
M. S. Syrtanov
A. M. Lider
R. S. Laptev
[J]. Journal of Materials Engineering and Performance, 2019, 28 : 6165 - 6173
[37] Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy
Pushilina, N. S.
Klimenov, V. A.
Cherepanov, R. O.
Kashkarov, E. B.
Fedorov, V. V.
Syrtanov, M. S.
Lider, A. M.
Laptev, R. S.
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (10) : 6165 - 6173
[38] Microstructure and Properties of Ti-6Al-4V Alloy by Wire plus Arc Additive Manufacturing
Zhang Feiqi
Chen Wenge
Tian Meijiao
[J]. RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (06) : 1890 - 1895
[39] Equalization of Ti-6Al-4V alloy welded joint by scanning electron beam welding
Chen, XF
Han, Z
Lou, XF
Hu, CS
Sun, CY
Li, ZK
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1999, 9 (03) : 535 - 540
[40] Elastic properties of the α' martensitic phase in the Ti-6Al-4V alloy obtained by additive manufacturing
Dumontet, Nathan
Connetable, Damien
Malard, Benoit
Viguier, Bernard
[J]. SCRIPTA MATERIALIA, 2019, 167 : 115 - 119

← 1 2 3 4 5 →