A finite element formulation for bending analysis of isotropic and orthotropic plates based on two-variable refined plate theory

被引:0
|
作者
Rouzegar, J. [1 ]
Sharifpoor, R. Abdoli [1 ]
机构
[1] Shiraz Univ Technol, Dept Mech & Aerosp Engn, Shiraz, Iran
关键词
Finite element method; Two-Variable plate theory; Rectangular plate element; Orthotropic plate; SHEAR DEFORMATION-THEORY; HIGHER-ORDER THEORY; FREE-VIBRATION;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A finite element formulation based on two-variable refined plate theory has been developed in this paper and has been implemented for bending analysis of isotropic and orthotropic plates. The two-variable refined plate theory can be used for thin and thick plates and predicts parabolic variation of transverse shear stresses across the plate thickness. In this theory the zero traction condition on the plate surfaces is satisfied without using shear correction factor. The governing equations have been derived using the principle of minimum potential energy. After constructing weak form equations, a new 4-node rectangular plate element with six degrees of freedom at each node has been used for discretization of the domain. The finite element code is written in MATLAB and some benchmark problems have been solved. Comparison of results with exact solution and other common plate theories shows the accuracy and efficiency of presented finite element formulation. (C) 2015 Sharif University of Technology. All rights reserved.
引用
收藏
页码:196 / 207
页数:12
相关论文
共 50 条
  • [21] A refined shear deformation theory for bending analysis of isotropic and orthotropic plates under various loading conditions
    Shinde, Bharti M.
    Sayyad, Atteshamuddin S.
    Ghumare, Shantaram M.
    JOURNAL OF MATERIALS AND ENGINEERING STRUCTURES, 2015, 2 (01): : 3 - 15
  • [22] Buckling analysis of plates using the two variable refined plate theory
    Kim, Seung-Eock
    Thai, Huu-Tai
    Lee, Jaehong
    THIN-WALLED STRUCTURES, 2009, 47 (04) : 455 - 462
  • [23] Free vibration of a Levy-type solution for plates based on two-variable refined plate theory by using SEM
    Kiryu, Shota
    Alisjahbana, Sofia W.
    Alisjahbana, Irene
    Nagao, Mitsuo
    Gan, Buntara S.
    JOURNAL OF VIBROENGINEERING, 2019, 21 (03) : 726 - 735
  • [24] Buckling analysis of micro-/nano-scale plates based on two-variable refined plate theory incorporating nonlocal scale effects
    Narendar, S.
    COMPOSITE STRUCTURES, 2011, 93 (12) : 3093 - 3103
  • [25] A two variable refined plate theory for laminated composite plates
    Kim, Seung-Eock
    Thai, Huu-Tai
    Lee, Jaehong
    COMPOSITE STRUCTURES, 2009, 89 (02) : 197 - 205
  • [26] Trefftz-unsymmetric finite element for bending analysis of orthotropic plates
    Yan Shang
    Ya-Dong Liu
    Shi-Xuan Liu
    Engineering with Computers, 2022, 38 : 1065 - 1079
  • [27] Trefftz-unsymmetric finite element for bending analysis of orthotropic plates
    Shang, Yan
    Liu, Ya-Dong
    Liu, Shi-Xuan
    ENGINEERING WITH COMPUTERS, 2022, 38 (SUPPL 2) : 1065 - 1079
  • [28] A novel mixed finite element formulation based on the refined zigzag theory for the stress analysis of laminated composite plates
    Kutlu, Akif
    Dorduncu, Mehmet
    Rabczuk, Timon
    COMPOSITE STRUCTURES, 2021, 267
  • [29] Bending behavior of laminated composite plates using the refined four-variable theory and the finite element method
    Bouazza, Mokhtar
    Becheri, Tawfiq
    Boucheta, Abderrahmane
    Benseddiq, Noureddine
    EARTHQUAKES AND STRUCTURES, 2019, 17 (03) : 257 - 270
  • [30] Buckling analysis of double-orthotropic nanoplates embedded in elastic media based on non-local two-variable refined plate theory using the GDQ method
    Mohammad Hossein Shokrani
    Morteza Karimi
    Mehdi Salmani Tehrani
    Hamid Reza Mirdamadi
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2016, 38 : 2589 - 2606