Numerical Analysis and Test Study of Bolted Structure

被引：0
|
作者：
Wang, Tao [1 ]
Yu, Shaorong [2 ]
Zheng, Xiaoya [1 ]
Zhang, Duo [1 ]
机构：
[1] Northwestern Polytech Univ, Sch Astronaut, Xian 710072, Peoples R China
[2] China Acad Engn Phys, Inst Struct Mech, Mianyang 621900, Peoples R China
来源：
ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2 | 2010年 / 26-28卷
关键词：
pre-tightening force; bolt; elastic contact;
D O I：
10.4028/www.scientific.net/AMM.26-28.231
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The theoretical value of bolt pre-tightening torque coefficient is typically 0.2 on load boundary condition simulations. A set of measuring setup has been designed in present study. Through direct measurement and electric measurement, a torque coefficient of 0.15 has been measured. The effects of pre-tightening torque coefficient on bolt stress field are studied numerically. Results show that the coefficient has significant effect on bolt stress fields and relatively conservative results will be achieved if a theoretical value of 0.2 is chosen. Studies on stresses around hole-edge and comparisons with test values show that simulated results of sigma(x), and sigma(y) agree well with test data and the relative errors are no more than 15%.
引用
收藏
页码：231 / +
页数：2
相关论文
共 50 条
  • [31] Global/Local analysis for progressive fracture of bolted structure
    Jiang, Jinfeng
    Zhang, Ying
    Sun, Qin
    Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2010, 42 (03): : 318 - 321
  • [32] Analysis of dynamic characteristics of a bolted drum rotor structure
    Meng C.-X.
    Zhang W.-S.
    Ma H.
    Qin Z.-Y.
    Fan F.-Y.
    Zhendong Gongcheng Xuebao/Journal of Vibration Engineering, 2019, 32 (03): : 517 - 525
  • [33] Numerical Study of the Hydrodynamic Structure of a Water Savonius Rotor in a Test Section
    Mabrouki, Ibrahim
    Driss, Zied
    Abid, Mohamed Salah
    JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2014, 8 (03): : 127 - 136
  • [34] The Study of Bolted Sandwich Structure used for Electric Vehicles
    Ounss, Soukaina
    Mounir, Hamid
    El Marjani, Abdellatif
    2018 6TH INTERNATIONAL RENEWABLE AND SUSTAINABLE ENERGY CONFERENCE (IRSEC), 2018, : 572 - 576
  • [35] Test study and numerical simulation analysis of explosion in steel tubes
    Li Xin-ping
    Dai Yi-fei
    Liu Jin-huan
    Zeng Ming
    Liu Li-sheng
    Zhang Kai-guang
    ROCK AND SOIL MECHANICS, 2009, 30 : 5 - 9
  • [36] Numerical Analysis of Tunnelling in Sand - A Case Study of a Centrifuge Test
    Yang, Bowen
    Bloodworth, Alan
    PROCEEDINGS OF GEOSHANGHAI 2018 INTERNATIONAL CONFERENCE: TUNNELLING AND UNDERGROUND CONSTRUCTION, 2018, : 250 - 259
  • [37] Experimental and numerical failure analysis of bolted joints in CFRP woven laminates
    Andréasson, N
    Mackinlay, CP
    Soutis, C
    AERONAUTICAL JOURNAL, 1998, 102 (1018): : 445 - 450
  • [38] EXPERIMENTAL AND NUMERICAL ANALYSIS OF PRELOAD IN BOLTED COMPOSITE JOINTS WITH TEMPERATURE LOADS
    Hermsdorf, Florian
    Matzies, Thomas
    Rapp, Helmut
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [39] Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage
    Xiao, Shan
    Huang, Mingxuan
    Xu, Zhonghai
    Yang, Yusong
    Du, Shanyi
    POLYMERS, 2024, 16 (20)
  • [40] NUMERICAL AND EXPERIMENTAL ANALYSIS OF BOLTED MIXED CONNECTION SUBJECTED TO CYCLIC LOADING
    Kataoka, Marcela Novischi
    El Debs, Ana Lucia
    FIB SYMPOSIUM PRAGUE 2011: CONCRETE ENGINEERING FOR EXCELLENCE AND EFFICIENCY, VOLS 1 AND 2, 2011, : 1201 - 1204
12345