Wear behavior of CBN tools while turning various hardened steels

被引：107

作者：

Poulachon, G

Bandyopadhyay, BP

Jawahir, IS

Pheulpin, S

Seguin, E

机构：

[1] ENSAM, LaBioMaP, F-71250 Cluny, France

[2] Univ N Dakota, Grand Forks, ND 58202 USA

[3] Univ Kentucky, Lexington, KY 40506 USA

来源：

WEAR | 2004年 / 256卷 / 3-4期

关键词：

hard turning; carbides; microstructure; tool-wear; flank wear; crater wear; CBN;

D O I：

10.1016/S0043-1648(03)00414-9

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An extensive study has been performed to investigate the tool-wear mechanisms of CBN cutting tools in finish turning of the following hardened steels: X155CrMoV12 (AISI D2) cold work steel, X38CrMoV5 (AISI H11) hot work steel, 35NiCrMo16 hot work steel and 100Cr6 bearing steel (AISI 52100), treated at 54 HRC. A large variation in tool-wear rate has been observed in machining of these steels. The generated tool flank grooves have been correlated with the hard carbide content of the workpieces. A crater wear study has also been performed and, it is shown that the appearance of an adhesive third body could induce a chemical wear in the tool. (C) 2003 Elsevier B.V. All rights reserved.

引用

页码：302 / 310

页数：9

共 50 条

[31] Effects of CBN content on characteristics of PCBN composites in turning GCr15 hardened steels
GUO Jiahui
YAO Feng
ZHAO Long
LI Binhua
FENG Fei
XIE Hui
FANG Haijiang
ZHANG Yingjiu
[J]. 金刚石与磨料磨具工程, 2019, 39 (04) : 22 - 29
[32] Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
Luo, SY
Liao, YS
Tsai, YY
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 88 (1-3) : 114 - 121
[33] Wear behaviour of CBN tool when turning hardened AISI D3 steel
Bouchelaghem, H.
Yallese, M. A.
Amirat, A.
Belhadi, S.
[J]. MECHANIKA, 2007, (03): : 57 - 65
[34] Machinability and Surface Quality Issues in Finish Turning of Hardened Steel with Coated Carbide and CBN Tools
Dogra, Manu
Sharma, Vishal S.
[J]. MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (10) : 1110 - 1117
[35] Wear behavior in turning high hardness alloy steel by CBN tool
Lin, H. M.
Liao, Y. S.
Wei, C. C.
[J]. WEAR, 2008, 264 (7-8) : 679 - 684
[36] Comparison Research on the Machinability of Hardened Steel when Dry Turning with Ceramic and CBN Cutting Tools
Tu, Chunjuan
Guo, Xuhong
Wang, Wei
Wang, Chihong
[J]. ADVANCES IN MECHATRONICS TECHNOLOGY, 2011, 43 : 573 - 577
[37] Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
Thamizhmanii, S.
Hasan, S.
[J]. WORLD CONGRESS ON ENGINEERING 2008, VOL III, 2008, : 1819 - 1823
[38] Wear and Breakage Features of Multi-coated Tools in Turning Hardened Steel
Hou, Zhigang
Zhao, Jun
Xu, Liqiang
Guo, Zhong
[J]. FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 : 2168 - +
[39] Precision milling of hardened steel with CBN tools
Matras, Andrzej
Zebala, Wojciech
Kowalczyk, Robert
[J]. PRECISION MACHINING VII, 2014, 581 : 182 - 187
[40] Wear mechanism of cBN tool in cutting of hardened steel
Egawa, Tsuneo
Ichikizaki, Tetsuo
Kuroda, Motofumi
Hiasa, Yukio
Tsukamoto, Hidehiko
[J]. Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1995, 61 (06): : 809 - 813

← 1 2 3 4 5 →