Wear behavior of CBN tools while turning various hardened steels

被引：107
|
作者：
Poulachon, G
Bandyopadhyay, BP
Jawahir, IS
Pheulpin, S
Seguin, E
机构：
[1] ENSAM, LaBioMaP, F-71250 Cluny, France
[2] Univ N Dakota, Grand Forks, ND 58202 USA
[3] Univ Kentucky, Lexington, KY 40506 USA
来源：
WEAR | 2004年 / 256卷 / 3-4期
关键词：
hard turning; carbides; microstructure; tool-wear; flank wear; crater wear; CBN;
D O I：
10.1016/S0043-1648(03)00414-9
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
An extensive study has been performed to investigate the tool-wear mechanisms of CBN cutting tools in finish turning of the following hardened steels: X155CrMoV12 (AISI D2) cold work steel, X38CrMoV5 (AISI H11) hot work steel, 35NiCrMo16 hot work steel and 100Cr6 bearing steel (AISI 52100), treated at 54 HRC. A large variation in tool-wear rate has been observed in machining of these steels. The generated tool flank grooves have been correlated with the hard carbide content of the workpieces. A crater wear study has also been performed and, it is shown that the appearance of an adhesive third body could induce a chemical wear in the tool. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：302 / 310
页数：9
相关论文
共 50 条
  • [1] Dynamic phenomena in finish turning of hardened steels with cBN-based tools
    N. E. Stakhniv
    L. N. Devin
    I. A. Petrusha
    A. S. Osipov
    [J]. Journal of Superhard Materials, 2009, 31 : 196 - 202
  • [2] Dynamic phenomena in finish turning of hardened steels with cBN-based tools
    Stakhniv, N. E.
    Devin, L. N.
    Petrusha, I. A.
    Osipov, A. S.
    [J]. JOURNAL OF SUPERHARD MATERIALS, 2009, 31 (03) : 196 - 202
  • [3] The Study of Wear of Cutting Tools of cBN-based Composite Material and the Influence of Tool Wear on Cutting Forces in Turning Hardened Steels
    Stakhniv, N. E.
    Devin, L. N.
    [J]. JOURNAL OF SUPERHARD MATERIALS, 2011, 33 (02) : 129 - 136
  • [4] The study of wear of cutting tools of cBN-based composite material and the influence of tool wear on cutting forces in turning hardened steels
    N. E. Stakhniv
    L. N. Devin
    [J]. Journal of Superhard Materials, 2011, 33
  • [5] Enhanced wear performance of laser machined tools in dry turning of hardened steels
    Pacella, Manuela
    Brigginshaw, Daniel
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 : 189 - 196
  • [6] Three-dimensional wear parameters and wear mechanisms in turning hardened steels with PCBN tools
    Boing, Denis
    Schroeter, Rolf Bertrand
    de Oliveira, Adilson Jose
    [J]. WEAR, 2018, 398 : 69 - 78
  • [7] Wear and life of tools with inserts from cBN-based polycrystalline Superhard materials in the finish turning of hardened steels at heavy feeds
    S. A. Klimenko
    A. S. Manokhin
    Yu. A. Mel’niichuk
    [J]. Journal of Superhard Materials, 2012, 34 : 49 - 55
  • [8] Wear and Life of Tools with Inserts from cBN-Based Polycrystalline Superhard Materials in the Finish Turning of Hardened Steels at Heavy Feeds
    Klimenko, S. A.
    Manokhin, A. S.
    Mel'niichuk, Yu. A.
    [J]. JOURNAL OF SUPERHARD MATERIALS, 2012, 34 (01) : 49 - 55
  • [9] Wear development and cutting forces on CBN cutting tool in Hard Part turning of different hardened steels
    Sadik, M. Ibrahim
    [J]. FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 232 - 237
  • [10] A tool-wear investigation in hard turning of various work materials with CBN tools
    Poulachon, G
    Jacquet, P
    Pheulpin, S
    Seguin, E
    Jawahir, IS
    [J]. RECENT ADVANCES IN INTEGRATED DESIGN AND MANUFACTURING IN MECHANICAL ENGINEERING, 2003, : 231 - 240
12345