Effects of elemental additions (Si and Sb) on the ageing behavior of AZ91 magnesium alloy

被引：39
|
作者：
Srinivasan, A. [1 ]
Pillai, U. T. S. [1 ]
Pai, B. C. [1 ]
机构：
[1] CSIR, NIIST, Mat & Minerals Div, Trivandrum 695019, Kerala, India
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2010年 / 527卷 / 24-25期
关键词：
AZ91 magnesium alloy; Ageing; Discontinuous precipitates; Continuous precipitates; Alloying additions; BINARY MG-AL; MECHANICAL-PROPERTIES; DISCONTINUOUS PRECIPITATION; CREEP-PROPERTIES; MICROSTRUCTURE;
D O I：
10.1016/j.msea.2010.07.020
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Effects of Si and Sb additions on the ageing behavior of AZ91 alloy have been investigated. Additions of Si and Sb lead to the formation of thermally stable Mg(2)Si and Mg(3)Sb(2) intermetallic phases, respectively, which are stable even after solution treatment at 410 degrees C for 48 h. Ageing treatment of AZ91 alloy at 200 degrees C results in the formation of Mg(12)Al(12) phases in two morphologies: (i) discontinuous and (ii) continuous. Further the results of the present study have shown that individual and combined additions of Si and Sb suppress the formation of discontinuous precipitate during ageing. Dense populations of continuous precipitates observed around the hard intermetallic phases reduce the amount of chemical driving force required for both the initiation and propagation of discontinuous precipitates. In spite of these observations, the hardness measurements of aged alloy samples indicate that the alloying additions do not improve the peak hardness of AZ91 significantly. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：6543 / 6550
页数：8
相关论文
共 50 条
  • [1] Influence of Si and Sb additions on the corrosion behavior of AZ91 magnesium alloy
    Srinivasan, A.
    Ningshen, S.
    Mudali, U. Kamachi
    Pillai, U. T. S.
    Pai, B. C.
    INTERMETALLICS, 2007, 15 (12) : 1511 - 1517
  • [2] Effect of Pb and Sb additions on the precipitation kinetics of AZ91 magnesium alloy
    Balasubramani, N.
    Srinivasan, A.
    Pillai, U. T. S.
    Pai, B. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 457 (1-2): : 275 - 281
  • [3] Effects of Zr Additions on the Microstructure and Impression Creep Behavior of AZ91 Magnesium Alloy
    F. Kabirian
    R. Mahmudi
    Metallurgical and Materials Transactions A, 2010, 41 : 3488 - 3498
  • [4] Effects of Zr Additions on the Microstructure and Impression Creep Behavior of AZ91 Magnesium Alloy
    Kabirian, F.
    Mahmudi, R.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (13): : 3488 - 3498
  • [5] Effects of Sn additions on the microstructure and impression creep behavior of AZ91 magnesium alloy
    Mahmudi, R.
    Moeendarbari, S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 566 : 30 - 39
  • [6] Effect of Pb addition on ageing behavior of AZ91 magnesium alloy
    Srinivasan, A.
    Pillai, U. T. S.
    Pai, B. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 452 : 87 - 92
  • [7] Effects of strontium additions on the microstructure and properties of AZ91 magnesium alloy
    Liu, SF
    Xu, P
    Huang, SY
    Wang, ZF
    PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY, 2004, : 677 - 682
  • [8] Microstructure and mechanical properties of Si and Sb added AZ91 magnesium alloy
    Srinivasan, A
    Pillai, UTS
    Pai, BC
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (08): : 2235 - 2243
  • [9] Microstructure and mechanical properties of Si and Sb added AZ91 magnesium alloy
    A. Srinivasan
    U. T. S. Pillai
    B. C. Pai
    Metallurgical and Materials Transactions A, 2005, 36 : 2235 - 2243
  • [10] Effects of Rare Earth Element Additions on the Impression Creep Behavior of AZ91 Magnesium Alloy
    F. Kabirian
    R. Mahmudi
    Metallurgical and Materials Transactions A, 2009, 40 : 2190 - 2201
12345