Compressive Properties of Additively Manufactured Titanium-Carbide

被引：0

作者：

Amin, Heet ^{[1
,3
]}

Wang, Jianshen ^{[1
,3
]}

Ameri, Ali A. H. ^{[1
,3
]}

Wang, Hongxu ^{[1
,3
]}

East, Daniel ^{[2
,3
]}

Escobedo-Diaz, Juan P. ^{[1
,3
]}

机构：

[1] Univ New South Wales, Sch Engn & Informat Technol, Canberra, ACT, Australia

[2] CSIRO Mfg, Melbourne, Vic, Australia

[3] Univ New South Wales, Australian Def Force Acad, Canberra, ACT 2600, Australia

来源：

CHARACTERIZATION OF MINERALS, METALS, AND MATERIALS 2021 | 2021年

关键词：

Additive manufacturing; Titanium-carbide; Microstructure characterisation; Mechanical properties;

D O I：

10.1007/978-3-030-65493-1_29

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The quasistatic compressive behaviour of additively manufactured titanium-carbide (Ti-6Al4-V-C or Ti-C) was investigated through quasistatic compression and microhardness tests. The carbon content within the titanium-carbide samples was varied in order to identify the influence of graphite on the properties of the material. The information gathered through the mechanical tests and optical microscopy was used in order to identify the effectiveness of titanium-carbide as a functionally graded material applied in ballistic protection. Initial QS compression testing on 5.3 and 6 wt%C content yielded similar results in mechanical properties. This contradicts the hypothesis which predicts an increase in strength with an increase in carbon content. Further details on the results will be presented in this study.

引用

页码：297 / 307

页数：11

共 50 条

[31] On the effect of throughout layer thickness variation on properties of additively manufactured cellular titanium structures
Sheydaeian, Esmat
Fishman, Zachary
Vlasea, Mihaela
Toyserkani, Ehsan
ADDITIVE MANUFACTURING, 2017, 18 : 40 - 47
[32] Machinability of additively manufactured titanium alloys: A comprehensive review
Li, Guangxian
Chandra, Sanjeet
Rashid, Rizwan Abdul Rahman
Palanisamy, Suresh
Ding, Songlin
JOURNAL OF MANUFACTURING PROCESSES, 2022, 75 : 72 - 99
[33] A Novel Titanium Alloy for Additively Manufactured Orthopaedic Implants
Alabort, Enrique
Barba, Daniel
De Diego, Alvaro
Aguirre-Cebrian, Maria Vega
Reed, Roger C.
TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2020, : 267 - 276
[34] Toward Bactericidal Enhancement of Additively Manufactured Titanium Implants
Fang, Yingjing
Attarilar, Shokouh
Yang, Zhi
Wei, Guijiang
Fu, Yuanfei
Wang, Liqiang
COATINGS, 2021, 11 (06)
[35] Mechanical Functionalization of Additively Manufactured Titanium with Light Elements
Kondoh, Katsuyoshi
Ichikawa, Eri
Issariyapat, Ammarueda
Umeda, Junko
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2024, 71 (12): : 586 - 595
[36] Electrochemical behaviour of additively manufactured titanium for biomedical applications
Gullino, Alessio
Grassini, Sabrina
Angelini, Emma
Padovano, Elisa
Badini, Claudio
Iannucci, Leonardo
Parvis, Marco
2020 IEEE INTERNATIONAL SYMPOSIUM ON MEDICAL MEASUREMENTS AND APPLICATIONS (MEMEA), 2020,
[37] Microstructural Properties of Heat-Treated LENS In Situ Additively Manufactured Titanium Aluminide
Monnamme Tlotleng
Journal of Materials Engineering and Performance, 2019, 28 : 701 - 708
[38] Processing, structure, and properties of additively manufactured titanium scaffolds with gyroid-sheet architecture
Kelly, Cambre N.
Kahra, C.
Maier, Hans J.
Gall, Ken
ADDITIVE MANUFACTURING, 2021, 41
[39] A roadmap for tailoring the microstructure and mechanical properties of additively manufactured commercially-pure titanium
Fischer, Ralf D.
Harvill, Greyson C.
Zhao, Rong
Talebinezhad, Hossein
Prorok, Barton C.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 892
[40] Mechanical Properties of Additively Manufactured Porous Titanium with Sub-Millimetre Structural Units
Ueda, Masato
Ikeda, Masahiko
Mori, Shigeo
Doi, Kenji
Kitagaki, Hisashi
Terauchi, Shuntaro
MATERIALS TRANSACTIONS, 2019, 60 (09) : 1792 - 1798

← 1 2 3 4 5 →